Catalog
Aventics "A" Pilotair® Panel Mounted Valves (3-Way, 4-Way & Multi-Function)
r-panel-mounted-valves-3-way-4-way-multi-functio-2
The Panel-Mounted "A" PILOTAIR Valve is a poppet-type pneumatic directional control valve consisting of a cam housing portion and a valve portion containing from one to four 3-way valve units.
The "A" PILOTAIR Valves’ streamlined compact design makes them especially suited for deluxe panel mountings such as in consoles or control panels. They can be mounted in either horizontal or vertical panels. The internal parts are enclosed to make them ideal for outdoors installations or other unfavorable working conditions.
Operating Versatility
Versatility has been designed into the operating cams. By reversing, rotating and rearranging these all-purpose cams, all the listed combinations can be made with a minimum of parts. Single unit valves for 3-way operation may be normally open or normally closed. The two unit valves have two, three, or five positions of operation as do the three and four unit valves. (See operation.) Detents can be had for two, three or five positions, or handle may be spring returned to center for three position operation.
Operation
In release position, as shown, the valve disc seats on the inlet valve seat and seals the passage from the inlet to the outlet port. The outlet port is vented to atmosphere through the center of the plunger.
As the plunger is forced downward by the cam force it seats on the valve disc. This seals the passage between the outlet port and atmosphere.
Further downward travel of the plunger unseats the valve disc from the inlet valve seat and allows inlet air pressure to flow to the outlet port. a1380.jpg
The model 2-HA-1R, 2-HA-1LR and 2-HA-1RW "A" PILOTAIR Valves are the same as the 2-HA-1 and 2-HA-1L models except that the cam is reversed to obtain pull instead of push operation. The 2-HA-1R model may also be mounted with the handle on the left hand side for tandem push operation with the 2-HA-1 model.
The Panel-Mounted "A" PILOTAIR Valve is a poppet-type pneumatic directional control valve consisting of a cam housing portion and a valve portion containing from one to four 3-way valve units.
The "A" PILOTAIR Valves’ streamlined compact design makes them especially suited for deluxe panel mountings such as in consoles or control panels. They can be mounted in either horizontal or vertical panels. The internal parts are enclosed to make them ideal for outdoors installations or other unfavorable working conditions.
Operating Versatility
Versatility has been designed into the operating cams. By reversing, rotating and rearranging these all-purpose cams, all the listed combinations can be made with a minimum of parts. Single unit valves for 3-way operation may be normally open or normally closed. The two unit valves have two, three, or five positions of operation as do the three and four unit valves. (See operation.) Detents can be had for two, three or five positions, or handle may be spring returned to center for three position operation.
Operation
In release position, as shown, the valve disc seats on the inlet valve seat and seals the passage from the inlet to the outlet port. The outlet port is vented to atmosphere through the center of the plunger.
As the plunger is forced downward by the cam force it seats on the valve disc. This seals the passage between the outlet port and atmosphere.
Further downward travel of the plunger unseats the valve disc from the inlet valve seat and allows inlet air pressure to flow to the outlet port. a1381.jpg
The Panel-Mounted "A" PILOTAIR Valve is a poppet-type pneumatic directional control valve consisting of a cam housing portion and a valve portion containing from one to four 3-way valve units.
The "A" PILOTAIR Valves’ streamlined compact design makes them especially suited for deluxe panel mountings such as in consoles or control panels. They can be mounted in either horizontal or vertical panels. The internal parts are enclosed to make them ideal for outdoors installations or other unfavorable working conditions.
Operating Versatility
Versatility has been designed into the operating cams. By reversing, rotating and rearranging these all-purpose cams, all the listed combinations can be made with a minimum of parts. Single unit valves for 3-way operation may be normally open or normally closed. The two unit valves have two, three, or five positions of operation as do the three and four unit valves. (See operation.) Detents can be had for two, three or five positions, or handle may be spring returned to center for three position operation.
Operation
In release position, as shown, the valve disc seats on the inlet valve seat and seals the passage from the inlet to the outlet port. The outlet port is vented to atmosphere through the center of the plunger.
As the plunger is forced downward by the cam force it seats on the valve disc. This seals the passage between the outlet port and atmosphere.
Further downward travel of the plunger unseats the valve disc from the inlet valve seat and allows inlet air pressure to flow to the outlet port. a1382.jpg
The "A" PILOTAIR Valves’ streamlined compact design makes them especially suited for deluxe panel mountings such as in consoles or control panels. They can be mounted in either horizontal or vertical panels. The internal parts are enclosed to make them ideal for outdoors installations or other unfavorable working conditions.
Operating Versatility
Versatility has been designed into the operating cams. By reversing, rotating and rearranging these all-purpose cams, all the listed combinations can be made with a minimum of parts. Single unit valves for 3-way operation may be normally open or normally closed. The two unit valves have two, three, or five positions of operation as do the three and four unit valves. (See operation.) Detents can be had for two, three or five positions, or handle may be spring returned to center for three position operation.
Operation
In release position, as shown, the valve disc seats on the inlet valve seat and seals the passage from the inlet to the outlet port. The outlet port is vented to atmosphere through the center of the plunger.
As the plunger is forced downward by the cam force it seats on the valve disc. This seals the passage between the outlet port and atmosphere.
Further downward travel of the plunger unseats the valve disc from the inlet valve seat and allows inlet air pressure to flow to the outlet port.
2-HA-3 and 2-HA-4 Pilotair Valves
The 2-HA-3 and 2-HA-4 models are an extension of the 2-HA-2 models. They were created basically to furnish a housing that will operate up to four 3-way valves to provide a variety of functions.
The body assembly of the 2-HA-3 and 2-HA-4 models is made up of two 2-HA-2 bodies under a single housing. The supply port of each body requires a separate supply source. The 2-HA-3 model has one cavity plugged to provide a three unit assembly, usually cavity 1L.
These valves were designed primarily for use with multiposition cylinders for Transmission Controls.
They also meet the application requirements for two different supply pressures, selector functions and directional control of up to four different circuits.
It is possible to operate all four valves with a single handle or in any combination from one to three valves with the left hand handle or with the right hand handle.
Double handle assemblies are provided for space conservation and for applications requiring two handles located adjacent to each other. Thus, two different functions can be controlled. As an example, the left handle can control direction (forward or reverse) and the right handle, range (1st, 2nd, 3rd and 4th gear). a1383.jpg
The "A" PILOTAIR Valves’ streamlined compact design makes them especially suited for deluxe panel mountings such as in consoles or control panels. They can be mounted in either horizontal or vertical panels. The internal parts are enclosed to make them ideal for outdoors installations or other unfavorable working conditions.
Operating Versatility
Versatility has been designed into the operating cams. By reversing, rotating and rearranging these all-purpose cams, all the listed combinations can be made with a minimum of parts. Single unit valves for 3-way operation may be normally open or normally closed. The two unit valves have two, three, or five positions of operation as do the three and four unit valves. (See operation.) Detents can be had for two, three or five positions, or handle may be spring returned to center for three position operation.
Operation
In release position, as shown, the valve disc seats on the inlet valve seat and seals the passage from the inlet to the outlet port. The outlet port is vented to atmosphere through the center of the plunger.
As the plunger is forced downward by the cam force it seats on the valve disc. This seals the passage between the outlet port and atmosphere.
Further downward travel of the plunger unseats the valve disc from the inlet valve seat and allows inlet air pressure to flow to the outlet port.
2-HA-3 and 2-HA-4 Pilotair Valves
The 2-HA-3 and 2-HA-4 models are an extension of the 2-HA-2 models. They were created basically to furnish a housing that will operate up to four 3-way valves to provide a variety of functions.
The body assembly of the 2-HA-3 and 2-HA-4 models is made up of two 2-HA-2 bodies under a single housing. The supply port of each body requires a separate supply source. The 2-HA-3 model has one cavity plugged to provide a three unit assembly, usually cavity 1L.
These valves were designed primarily for use with multi position cylinders for Transmission Controls.
They also meet the application requirements for two different supply pressures, selector functions and directional control of up to four different circuits.
It is possible to operate all four valves with a single handle or in any combination from one to three valves with the left hand handle or with the right hand handle.
Double handle assemblies are provided for space conservation and for applications requiring two handles located adjacent to each other. Thus, two different functions can be controlled. As an example, the left handle can control direction (forward or reverse) and the right handle, range (1st, 2nd, 3rd and 4th gear). a1384.jpg
The "A" PILOTAIR Valves’ streamlined compact design makes them especially suited for deluxe panel mountings such as in consoles or control panels. They can be mounted in either horizontal or vertical panels. The internal parts are enclosed to make them ideal for outdoors installations or other unfavorable working conditions.
Operating Versatility
Versatility has been designed into the operating cams. By reversing, rotating and rearranging these all-purpose cams, all the listed combinations can be made with a minimum of parts. Single unit valves for 3-way operation may be normally open or normally closed. The two unit valves have two, three, or five positions of operation as do the three and four unit valves. (See operation.) Detents can be had for two, three or five positions, or handle may be spring returned to center for three position operation.
Operation
In release position, as shown, the valve disc seats on the inlet valve seat and seals the passage from the inlet to the outlet port. The outlet port is vented to atmosphere through the center of the plunger.
As the plunger is forced downward by the cam force it seats on the valve disc. This seals the passage between the outlet port and atmosphere.
Further downward travel of the plunger unseats the valve disc from the inlet valve seat and allows inlet air pressure to flow to the outlet port.
2-HA-3 and 2-HA-4 Pilotair Valves
The 2-HA-3 and 2-HA-4 models are an extension of the 2-HA-2 models. They were created basically to furnish a housing that will operate up to four 3-way valves to provide a variety of functions.
The body assembly of the 2-HA-3 and 2-HA-4 models is made up of two 2-HA-2 bodies under a single housing. The supply port of each body requires a separate supply source. The 2-HA-3 model has one cavity plugged to provide a three unit assembly, usually cavity 1L.
These valves were designed primarily for use with multi position cylinders for Transmission Controls.
They also meet the application requirements for two different supply pressures, selector functions and directional control of up to four different circuits.
It is possible to operate all four valves with a single handle or in any combination from one to three valves with the left hand handle or with the right hand handle.
Double handle assemblies are provided for space conservation and for applications requiring two handles located adjacent to each other. Thus, two different functions can be controlled. As an example, the left handle can control direction (forward or reverse) and the right handle, range (1st, 2nd, 3rd and 4th gear). a1384.jpg
Three Way-Normally Closed Cartridge Valves
OPERATION
The "A" PILOTAIR® cartridge valve is a mechanically operated (straight push) 3-way directional control valve. It can be easily used in manifolds or in custom installations. This cartridge valve can also be used to graduate pressure (consult factory for additional information).
In release position, as shown, the valve disc seals on the inlet valve seat and closes the passage from the inlet to the outlet. The outlet is vented to atmosphere through the center of the plunger. As the plunger is forced downward by an external force, it seats on the valve disc. This seals the passage between the outlet and exhaust.
Further downward travel of the plunger unseats the valve disc from the inlet valve seat and allows inlet air pressure to flow to the outlet.
Release of the external force, allows the plunger and valve to spring return to the original position.
Install the valve to ensure operation within the travel limits shown on the outline drawings. Travel beyond these limits can cause damage to the valve.
a1437.jpg
"A" PILOTAIR Valves
"H" CONTROLAIR Valves
FLEXAIR Valves - Side Valve Cavity
Quick, positive repair and conversion can be accomplished by directly replacing the old individual parts with the new factory pressure tested cartridge. The cartridge valve simplifies repair and eliminates possible problems due to improper parts assembly. The modern engineered plastic and stainless steel construction provide superior corrosion resistance and sealing characteristics.
NOTE:
With the above kits, the elastomer seals and some common wear parts in the valve portions of the assemblies can be repaired. On severely worn or damaged valves, additional parts may be required.
The above kits do not contain any parts for the mechanical operating portions of the valves. The mechanical operating portions of the valve should be repaired when necessary, with individually selected parts, and tested before being put in service.
Refer to Service Bulletin SM-700.7400 for additional parts information and service instructions on the type "A" PILOTAIR pneumatic directional valves. a1442.jpg
Rexroth 2-BA-1 Pilotair® Single Unit Valves, 3-Way Button Operated
(3) The model 2-BA-1 PILOTAIR Valve is a panel mounted, 2 position button operated 3-way valve with 1/4" NPT inlet and outlet ports.The Panel-Mounted "A" PILOTAIR Valve is a poppet-type pneumatic directional control valve consisting of a cam housing portion and a valve portion containing from one to four 3-way valve units.
The "A" PILOTAIR Valves’ streamlined compact design makes them especially suited for deluxe panel mountings such as in consoles or control panels. They can be mounted in either horizontal or vertical panels. The internal parts are enclosed to make them ideal for outdoors installations or other unfavorable working conditions.
Operating Versatility
Versatility has been designed into the operating cams. By reversing, rotating and rearranging these all-purpose cams, all the listed combinations can be made with a minimum of parts. Single unit valves for 3-way operation may be normally open or normally closed. The two unit valves have two, three, or five positions of operation as do the three and four unit valves. (See operation.) Detents can be had for two, three or five positions, or handle may be spring returned to center for three position operation.
Operation
In release position, as shown, the valve disc seats on the inlet valve seat and seals the passage from the inlet to the outlet port. The outlet port is vented to atmosphere through the center of the plunger.
As the plunger is forced downward by the cam force it seats on the valve disc. This seals the passage between the outlet port and atmosphere.
Further downward travel of the plunger unseats the valve disc from the inlet valve seat and allows inlet air pressure to flow to the outlet port. a1380.jpg
Rexroth 2-HA-1 Pilotair® Single Unit Valves, 3-Way Handle Operated
(12) The model 2-HA-1 "A" PILOTAIR Valve is a panel mounted, handle operated 3-way valve with 1/4" NPT inlet and outlet ports. It contains a spring opposed detent cam to hold the handle in either of its two extreme positions. The 2-HA-1L model is available with an additional external handle latch which requires manual release to insure against unintentional operation. The 2-HA-1W model is spring returned from position 2 to center position, which is the same as position 1 (normally closed).The model 2-HA-1R, 2-HA-1LR and 2-HA-1RW "A" PILOTAIR Valves are the same as the 2-HA-1 and 2-HA-1L models except that the cam is reversed to obtain pull instead of push operation. The 2-HA-1R model may also be mounted with the handle on the left hand side for tandem push operation with the 2-HA-1 model.
The Panel-Mounted "A" PILOTAIR Valve is a poppet-type pneumatic directional control valve consisting of a cam housing portion and a valve portion containing from one to four 3-way valve units.
The "A" PILOTAIR Valves’ streamlined compact design makes them especially suited for deluxe panel mountings such as in consoles or control panels. They can be mounted in either horizontal or vertical panels. The internal parts are enclosed to make them ideal for outdoors installations or other unfavorable working conditions.
Operating Versatility
Versatility has been designed into the operating cams. By reversing, rotating and rearranging these all-purpose cams, all the listed combinations can be made with a minimum of parts. Single unit valves for 3-way operation may be normally open or normally closed. The two unit valves have two, three, or five positions of operation as do the three and four unit valves. (See operation.) Detents can be had for two, three or five positions, or handle may be spring returned to center for three position operation.
Operation
In release position, as shown, the valve disc seats on the inlet valve seat and seals the passage from the inlet to the outlet port. The outlet port is vented to atmosphere through the center of the plunger.
As the plunger is forced downward by the cam force it seats on the valve disc. This seals the passage between the outlet port and atmosphere.
Further downward travel of the plunger unseats the valve disc from the inlet valve seat and allows inlet air pressure to flow to the outlet port. a1381.jpg
Rexroth 2-HA-2 Pilotair® Double Unit Valves, 4-Way Handle Operated
(33) The 2-HA-2 PILOTAIR Valves are panel-mounted, 2, 3 and 5 position valves with one inlet and two outlet ports. Available with detents in each handle position, a latching handle that requires manual release to insure against unintentional operation, (Also available with handle 2" longer) or spring return to center position. All ports are 1/4" NPT.The Panel-Mounted "A" PILOTAIR Valve is a poppet-type pneumatic directional control valve consisting of a cam housing portion and a valve portion containing from one to four 3-way valve units.
The "A" PILOTAIR Valves’ streamlined compact design makes them especially suited for deluxe panel mountings such as in consoles or control panels. They can be mounted in either horizontal or vertical panels. The internal parts are enclosed to make them ideal for outdoors installations or other unfavorable working conditions.
Operating Versatility
Versatility has been designed into the operating cams. By reversing, rotating and rearranging these all-purpose cams, all the listed combinations can be made with a minimum of parts. Single unit valves for 3-way operation may be normally open or normally closed. The two unit valves have two, three, or five positions of operation as do the three and four unit valves. (See operation.) Detents can be had for two, three or five positions, or handle may be spring returned to center for three position operation.
Operation
In release position, as shown, the valve disc seats on the inlet valve seat and seals the passage from the inlet to the outlet port. The outlet port is vented to atmosphere through the center of the plunger.
As the plunger is forced downward by the cam force it seats on the valve disc. This seals the passage between the outlet port and atmosphere.
Further downward travel of the plunger unseats the valve disc from the inlet valve seat and allows inlet air pressure to flow to the outlet port. a1382.jpg
Rexroth 2-HA-3 & 2-HA-4 Multiple Function Models, Single Handle Gated
(17) The Panel-Mounted "A" PILOTAIR Valve is a poppet-type pneumatic directional control valve consisting of a cam housing portion and a valve portion containing from one to four 3-way valve units.The "A" PILOTAIR Valves’ streamlined compact design makes them especially suited for deluxe panel mountings such as in consoles or control panels. They can be mounted in either horizontal or vertical panels. The internal parts are enclosed to make them ideal for outdoors installations or other unfavorable working conditions.
Operating Versatility
Versatility has been designed into the operating cams. By reversing, rotating and rearranging these all-purpose cams, all the listed combinations can be made with a minimum of parts. Single unit valves for 3-way operation may be normally open or normally closed. The two unit valves have two, three, or five positions of operation as do the three and four unit valves. (See operation.) Detents can be had for two, three or five positions, or handle may be spring returned to center for three position operation.
Operation
In release position, as shown, the valve disc seats on the inlet valve seat and seals the passage from the inlet to the outlet port. The outlet port is vented to atmosphere through the center of the plunger.
As the plunger is forced downward by the cam force it seats on the valve disc. This seals the passage between the outlet port and atmosphere.
Further downward travel of the plunger unseats the valve disc from the inlet valve seat and allows inlet air pressure to flow to the outlet port.
2-HA-3 and 2-HA-4 Pilotair Valves
The 2-HA-3 and 2-HA-4 models are an extension of the 2-HA-2 models. They were created basically to furnish a housing that will operate up to four 3-way valves to provide a variety of functions.
The body assembly of the 2-HA-3 and 2-HA-4 models is made up of two 2-HA-2 bodies under a single housing. The supply port of each body requires a separate supply source. The 2-HA-3 model has one cavity plugged to provide a three unit assembly, usually cavity 1L.
These valves were designed primarily for use with multiposition cylinders for Transmission Controls.
They also meet the application requirements for two different supply pressures, selector functions and directional control of up to four different circuits.
It is possible to operate all four valves with a single handle or in any combination from one to three valves with the left hand handle or with the right hand handle.
Double handle assemblies are provided for space conservation and for applications requiring two handles located adjacent to each other. Thus, two different functions can be controlled. As an example, the left handle can control direction (forward or reverse) and the right handle, range (1st, 2nd, 3rd and 4th gear). a1383.jpg
Rexroth 2-HA-3 & 2-HA-4 Multiple Function Models, Double Handle Detented
(3) The Panel-Mounted "A" PILOTAIR Valve is a poppet-type pneumatic directional control valve consisting of a cam housing portion and a valve portion containing from one to four 3-way valve units.The "A" PILOTAIR Valves’ streamlined compact design makes them especially suited for deluxe panel mountings such as in consoles or control panels. They can be mounted in either horizontal or vertical panels. The internal parts are enclosed to make them ideal for outdoors installations or other unfavorable working conditions.
Operating Versatility
Versatility has been designed into the operating cams. By reversing, rotating and rearranging these all-purpose cams, all the listed combinations can be made with a minimum of parts. Single unit valves for 3-way operation may be normally open or normally closed. The two unit valves have two, three, or five positions of operation as do the three and four unit valves. (See operation.) Detents can be had for two, three or five positions, or handle may be spring returned to center for three position operation.
Operation
In release position, as shown, the valve disc seats on the inlet valve seat and seals the passage from the inlet to the outlet port. The outlet port is vented to atmosphere through the center of the plunger.
As the plunger is forced downward by the cam force it seats on the valve disc. This seals the passage between the outlet port and atmosphere.
Further downward travel of the plunger unseats the valve disc from the inlet valve seat and allows inlet air pressure to flow to the outlet port.
2-HA-3 and 2-HA-4 Pilotair Valves
The 2-HA-3 and 2-HA-4 models are an extension of the 2-HA-2 models. They were created basically to furnish a housing that will operate up to four 3-way valves to provide a variety of functions.
The body assembly of the 2-HA-3 and 2-HA-4 models is made up of two 2-HA-2 bodies under a single housing. The supply port of each body requires a separate supply source. The 2-HA-3 model has one cavity plugged to provide a three unit assembly, usually cavity 1L.
These valves were designed primarily for use with multi position cylinders for Transmission Controls.
They also meet the application requirements for two different supply pressures, selector functions and directional control of up to four different circuits.
It is possible to operate all four valves with a single handle or in any combination from one to three valves with the left hand handle or with the right hand handle.
Double handle assemblies are provided for space conservation and for applications requiring two handles located adjacent to each other. Thus, two different functions can be controlled. As an example, the left handle can control direction (forward or reverse) and the right handle, range (1st, 2nd, 3rd and 4th gear). a1384.jpg
Rexroth 2-HA-3 & 2-HA-4 Multiple Function Models, Double Handle
(3) The Panel-Mounted "A" PILOTAIR Valve is a poppet-type pneumatic directional control valve consisting of a cam housing portion and a valve portion containing from one to four 3-way valve units.The "A" PILOTAIR Valves’ streamlined compact design makes them especially suited for deluxe panel mountings such as in consoles or control panels. They can be mounted in either horizontal or vertical panels. The internal parts are enclosed to make them ideal for outdoors installations or other unfavorable working conditions.
Operating Versatility
Versatility has been designed into the operating cams. By reversing, rotating and rearranging these all-purpose cams, all the listed combinations can be made with a minimum of parts. Single unit valves for 3-way operation may be normally open or normally closed. The two unit valves have two, three, or five positions of operation as do the three and four unit valves. (See operation.) Detents can be had for two, three or five positions, or handle may be spring returned to center for three position operation.
Operation
In release position, as shown, the valve disc seats on the inlet valve seat and seals the passage from the inlet to the outlet port. The outlet port is vented to atmosphere through the center of the plunger.
As the plunger is forced downward by the cam force it seats on the valve disc. This seals the passage between the outlet port and atmosphere.
Further downward travel of the plunger unseats the valve disc from the inlet valve seat and allows inlet air pressure to flow to the outlet port.
2-HA-3 and 2-HA-4 Pilotair Valves
The 2-HA-3 and 2-HA-4 models are an extension of the 2-HA-2 models. They were created basically to furnish a housing that will operate up to four 3-way valves to provide a variety of functions.
The body assembly of the 2-HA-3 and 2-HA-4 models is made up of two 2-HA-2 bodies under a single housing. The supply port of each body requires a separate supply source. The 2-HA-3 model has one cavity plugged to provide a three unit assembly, usually cavity 1L.
These valves were designed primarily for use with multi position cylinders for Transmission Controls.
They also meet the application requirements for two different supply pressures, selector functions and directional control of up to four different circuits.
It is possible to operate all four valves with a single handle or in any combination from one to three valves with the left hand handle or with the right hand handle.
Double handle assemblies are provided for space conservation and for applications requiring two handles located adjacent to each other. Thus, two different functions can be controlled. As an example, the left handle can control direction (forward or reverse) and the right handle, range (1st, 2nd, 3rd and 4th gear). a1384.jpg
Rexroth 3-Way Normally Closed Pilotair® Cartridge Valves
(2) "A" Pilotair® Pneumatic Directional Control ValvesThree Way-Normally Closed Cartridge Valves
OPERATION
The "A" PILOTAIR® cartridge valve is a mechanically operated (straight push) 3-way directional control valve. It can be easily used in manifolds or in custom installations. This cartridge valve can also be used to graduate pressure (consult factory for additional information).
In release position, as shown, the valve disc seals on the inlet valve seat and closes the passage from the inlet to the outlet. The outlet is vented to atmosphere through the center of the plunger. As the plunger is forced downward by an external force, it seats on the valve disc. This seals the passage between the outlet and exhaust.
Further downward travel of the plunger unseats the valve disc from the inlet valve seat and allows inlet air pressure to flow to the outlet.
Release of the external force, allows the plunger and valve to spring return to the original position.
Install the valve to ensure operation within the travel limits shown on the outline drawings. Travel beyond these limits can cause damage to the valve.
| TOLERENCES - Unless specified otherwise | |
| TYPE | FINISHED |
| DEC .00 | ± .015 |
| DEC .000 | ± .005 |
| ANGLES | ± 1/2º |
Aventics "A" Pilotair® Cartridge Repair Kits
(4) "A" Pilotair® Cartridge Repair Kits- Simplified Repair
- Factory Tested
- Fits Most Previous Design "A" Pilotair Valves
- Corrosion Resistant
"A" PILOTAIR Valves
"H" CONTROLAIR Valves
FLEXAIR Valves - Side Valve Cavity
Quick, positive repair and conversion can be accomplished by directly replacing the old individual parts with the new factory pressure tested cartridge. The cartridge valve simplifies repair and eliminates possible problems due to improper parts assembly. The modern engineered plastic and stainless steel construction provide superior corrosion resistance and sealing characteristics.
NOTE:
With the above kits, the elastomer seals and some common wear parts in the valve portions of the assemblies can be repaired. On severely worn or damaged valves, additional parts may be required.
The above kits do not contain any parts for the mechanical operating portions of the valves. The mechanical operating portions of the valve should be repaired when necessary, with individually selected parts, and tested before being put in service.
Refer to Service Bulletin SM-700.7400 for additional parts information and service instructions on the type "A" PILOTAIR pneumatic directional valves. a1442.jpg
