Call 800.835.2838 or 316.263.9511Email
Distributor to Industry, Inc.
All Categories > Drilling Rig Air Valves for MMO (Marine, Mobile & Oil Field) > Bosch-Rexroth (WABCO) Drilling Rig Air Valves > Rexroth Type 'A' Pilotair® Valves - Pneumatic Directional Control > Rexroth "A" Pilotair® Block-Type 3-Way Valves > Item # R431004674  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Item # R431004674, Rexroth 2-PA-1A Normally Closed Pilotair® Valves, Air Piloted



The air pilot operated 2-PA-1A PILOTAIR Valve consists of the Pilot Cylinder Operator Kit assembled to the 2-MA-1A PILOTAIR Valve. Suitable for pilot pressures from 10 to 250 psi (0.7 to 17.2 bar). For each 50 psi (3.4 bar) of inlet pressure, the control pressure must increase 8 psi (0.6 bar). Starting with zero inlet pressure, control pressure must be 10 psi (0.7 bar).

MATERIALS - Both the block type and panel-mounted "A" PILOTAIR Valves have die-cast anodized aluminum bodies for corrosion resistance. They use a new one piece unitized cartridge valve element that is made of a engineered plastic and stainless steel. The seals are oil resistant, synthetic rubber.

The panel-mounted "A" PILOTAIR contains hardened sintered steel cams and cam followers. The cam shaft is a steel extrusion. The handle shaft is cadmium plated steel.

PRESSURES - Maximum inlet pressure is 250 psi (17.2 bar).

TEMPERATURE - Maximum operating temperature is -40º F to +200ºF (-40ºC to +93ºC)

MEDIA - Air & inert gases (consult factory for other uses).

CAPACITY - As shown by the graph, these valves have been designed to give maximum flow capacity to speed operations and provide full power.

CARTRIDGE VALVE ELEMENT - is constructed of engineered plastic and stainless steel. This design gives superior corrosion resistance and sealing also simplifies repairs.

The Block-Type "A" PILOTAIR Valve is a poppet-type, on-off, 3 way directional valve enclosed in a solid die-cast aluminum block for ruggedness and ease of installation. The basic valve and all operators can be easily and quickly assembled without special tools. This valve line features a choice of six operators, assembled to the basic valve 2-MA-1A, to provide cam, lever and pilot cylinder operation. The design permits conversion from one type of operation to another and simplifies stocking. The body design lends itself to individual or multiple-mounting operations. The Block-Type "A" PILOTAIR Valve can be installed in any convenient position without interfering with the valve operation. The straight, flat sides are identical to provide either right or left hand horizontal mounting. Mounting holes are also provided for mounting the valve vertically from the top or bottom. All valves, except the Normally Open 2-CA-1B, have dual 1/4" NPT IN and OUT ports for ease of piping. Pipe plugs are furnished with each valve for plugging the unused ports. Unitized cartridge valve elements are used for long life, easy service, corrosion resistance and excellent sealing characteristics.





Specifications  · Features and Specifications

Specifications

Old Part #

P 058723
P -058723-00000

P 58723

P058723

P58723

Configuration

Normally Closed

Operation

Straight Push

Length

2.69 in.

Width

1.50 in.

Height

2.12 in.

Maximum Inlet Pressure

250 psi
17.2
bar

Maximum Operating Temperature

-40 to +200 ºF
-40 to +93
ºC

Media

Air & inert gases (consult factory for other uses).


Features and Specifications
"A" PILOTAIR, Block-type and Panel Mounted Valves The REXROTH "A" PILOTAIR Valves are block-type and panel-mounted poppet-type directional valves which open, close or vent an air circuit. The poppet-type directional valve is ideal for frequent usage because of its ease of operation. This valve line makes maximum use of high production parts which are interchangeable throughout this product line as well as providing interchangeability of parts with the poppets in our Controlair ® and Flexair® Valve product lines. A definite advantage is gained when all of these products are used in the same application.

A very short travel of the valve parts produces full capacity flow. This factor is important in fact action circuits and repetitive manual or mechanical operations. Its design is highly compact for conserving mounting space and appearance. Spring force and air pressure are combined to give a tight seal and its resulting economies. Both block type and panel mounted "A" PILOTAIR Valves have a large flow capacity and have been proven under the most adverse conditions for dependable operation.



 MORE IMAGES 

·  Type A Pilotair Pressure Drop vs Flow Curve

·  2-PA-1A Normally Closed Pilotair® Valves, Air Piloted Details



 Rexroth Operator Kits for "A" Pilotair® Valves 


Image
Rexroth Operator Kits for "A" Pilotair® Valves

 Pilotair Cartridge Repair Kits 


Rexroth A Pilotair® Cartridge Repair Kits
Rexroth "A" Pilotair® Cartridge Repair Kits

Site created by ThomasNet Web Solutions and powered by Navigator Platform