Call 800.835.2838 or 316.263.9511Email
Distributor to Industry, Inc.
All Categories > Industrial Air Valves > Aventics Industrial Air Valves > Aventics Series 740 Valves > Item # R432008894  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Item # R432008894, Rexroth Series 740 Intrinsically Safe Solenoid Valves, 5/2


4 Way / 2 & 3 Position Intrinsically Safe Solenoid Valves for Hazardous Locations
Classes I, II and III Div I
Groups A, B, C, D, E, F and G

TECHNICAL DATA:
Port Sizes:
    Integrated Fittings for 3/8", 5/16", and 8mm tubing
    Push-in fitting styles bodies available for metric tubing only (2 position only)
Working Pressure:
    20 PSI minimum
    150 PSI maximum
    External Pilots not available
Flow:
    Cv=0.7 - with Integrated Fittings
    (Cv=1.3 - comparable flow to threaded part valve)
Temperature Range:
    Solenoid Valve +5°F to 122°F
    Air Pilot +5°F to 140°F
Media: Air (either lubricated or non-lubricated)
Materials: Polyacetal Engineering plastic with Buna N seals and diaphragms
Combination Manual Override: Locking & Non-Locking

Electrical connectors must be ordered separately. One per solenoid required. See complete listing on Solenoid Connectors page.

Recommended Tubing:
  • Standard 3/8" O.D> x 0.062" wall - poly tubing
    5/16" O.D. x 0.040 wall - nylon tubing
    8mm x 1.00mm wall poly tubing
Requires optional tube nut kit (R432015289)
Valves designed for 10mm O.D. x 1mm wall poly tubing are also available.
Adapters available: 1/4" O.D. x 0.040 wall - poly tubing.
Tube nuts are supplied with each valve for 3/8" x 0.062 wall poly tubing.

For use in low voltage (24VDC) intrinsically safe applications. No other Voltage is approved.
Comes with standard non-lighted DIN solenoid connector.
Must be connected to an FM Approved Zener Diode Barrier.

Maximum valve pressure is 115 psi.

FM Approved Barrier Manufacturers:
Stahl Incorporated-Woburn, MA
(Request Application Memo #35 and ADV-300.ISSV for Intrinsically Safe Valve information and Stahl Barrier part numbers.)




Specifications  · Electrical Data  · Features

Specifications

Old Part #
P - 028044-00005

Type
Single Solenoid

Voltage Tolerance
± 10%

Min. Working Pressure
20 psi

Maximum Working Pressure
150 psi

Temperature Range
+5 to 122 ºF

Media
Air (either lubricated or non-lubricated)

Material
Polyacetal Engineering plastic with Buna N seals and diaphragms

Combination Manual Override
Locking & Non-Locking


Electrical Data
Standard Voltage (all coils are rated for continuous duty) Power Consumption
Inrush Holding
24 VAC-50/60 Hz,
110V-50 Hz/120V-60 Hz
220V-50 Hz/240V		 6.4 VA 3.7 VA
6, 12, 24 VDC 2.7 W




Features
  • NEMA 4 Electrical protection
  • UL recognized & CSA approved coils version available
  • Packaged as a cylinder/valve combination with TaskMaster® cylinders sizes 1 1/2" thru 4".
  • Integrated fittings
  • Adjustable built-in flow controls in R and S exhausts on two position valves
  • Cycle life: 20 to 150 million cycles
  • Response time for 24VDC single solenoid valve:
    (at supply pressure 85 psi)
    On (0-77 psi) 18ms or less
    Off (85-8 psi) 32 ms or less


 MORE IMAGES 

·  Installation Information



 Solenoid Connectors 


Rexroth Solenoid Connectors and Cables (8941000302)
8941000302
Aventics Solenoid Connectors and Cables

Rexroth Solenoid Connectors and Cables (R432013747)
R432013747
Aventics Solenoid Connectors and Cables

more available ..


Site created by ThomasNet Web Solutions and powered by Navigator Platform