Item # R431008491, Rexroth TaskMaster® Solenoid Valves (2 Position, 1/4" & 3/8" NPTF) On Distributor To Industry, Inc.

Adhesives & Sealants for Aerospace, Automotive & Industrial Applications

Air Valves for MMO (Marine, Mobile & Oil Field)

Industrial Air Valves Couplings & Manifolds

Pneumatic/Hydraulic Fittings & Couplings

Fluid Power Process Instrumentation & Process Control Equipment

All Categories > Drilling Rig Air Valves for MMO (Marine, Mobile & Oil Field) > Emerson Aventics (WABCO) Drilling Rig Air Valves > Aventics TaskMaster® Valve, 4-Way Directional Control > Aventics TaskMaster® Solenoid Valves (2 Position, 1/4" & 3/8" NPTF) > Item # R431008491


	Item # R431008491, Rexroth TaskMaster® Solenoid Valves (2 Position, 1/4" & 3/8" NPTF)

Rexroth TaskMaster® Solenoid Valves, 2 Position, 1/4" & 3/8" NPTF, 3 Position, 1/4" & 3/8" NPTF, Explosion-Proof Valves, Lever Operated Valves

larger image

Solenoid Operated, 2 Position Subbase Mounted
Single or Double Solenoid Operated

TECHNICAL DATA:
Port Sizes: 1/4" & 3/8" NPTF
Working Pressure:

Minimum Pilot Pressure: 2 position: 15 psi (1 bar), Spring return models: 25 psi (1.7 bar)
Flow: C_v 1.0 (1000 Nl/min)
Temperature Range: -20ºF to +160ºF (-29ºC to 71ºC)
Media: Air and inert gases (In service higher than 18 cycles per minute or with continuous air flow, a lubricator is recommended.)
Materials:

Manual Override: Non-Locking

Note: Other coil voltages are available - selection will be done at checkout.

Specifications · Electrical Data · Other Notes · Features

Specifications

Old Part #

PJ 032711
PJ 32711
PJ032711
PJ-032711-00000
PJ32711

Subbase

With 3/8" subbase

Type

Single Solenoid

Pilot

Internal

Weight

2.63 lb
1.19 kg

Port Size

1/4" & 3/8" NPTF

Working Pressure (Valve Inlet)

150 psi (10.3 bar) maximum with internal pilot
200 psi (13.8 bar) maximum with external pilot

Minimum Pilot Pressure

2 position: 15 psi (1 bar)
Spring return models: 25 psi (1.7 bar)

Flow

C_v 1.0 (1000 Nl/min)

Temperature Range

-20 to +160 ºF
-29 to 71 ºC

Manual Override

Non-Locking

Molded Coil

Standard

Lead Length

24 in.

Coil Voltage¹

120VAC@60 Hz Primary, 38VDC Secondary
12VDC Primary, 42VAC@60 Hz Secondary
240VAC@60 Hz Primary, 70VDC Secondary
24VDC Primary, 86VAC@60 Hz Secondary
480VAC@60 Hz Primary, 145VDC Secondary
Standard 120VAC@60 Hz Coil

¹ Primary and secondary voltages will be stenciled on the solenoid data plate.

Electrical Data

Standard Voltage (all coils are rated for continues duty)	Power Consumption
	Inrush	Holding
24, 120, 240 VAC 60 Hz	33 VA	22 VA
12, 24 VDC	12 W

Molded Coil: Standard
Lead Length: 24"

Other Notes

Solenoid pilot pressure must be a minimum of 25 psi with return springs, 15 psi less return springs and a maximum of 150 psi. A flush, non-locking manual override is standard for manual operation when the electric power is off. Other optional features are available upon request such as high pressure (200 psi) solenoids.

Features

Subbase mounted four-way valves for two and three position (spring centered) closed center operation and a selection of three operators.
Three-way function can be obtained by plugging one delivery port to provide either normally open or closed operation.
Unique subbase is designed to be mounted to the customer’s equipment with only two mounting bolts, which saves labor and material during installation.
Separate tapped exhaust ports, in the subbase, for each delivery port allow exhaust air to be piped away for safety or noise reduction purposes and permit use of exhaust restrictors for cylinder speed control.
Minimum number of wearing parts. Lessens the chance of equipment downtime and reduces the cost of repair.
Low pilot pressure. A low (15 psi without springs-25 psi with springs) pilot pressure rating assures reliable operation. Fluctuating line pressures within the plant do not affect operation.
Continuous-duty solenoid. Won’t burn out...even when energized for extended periods. Pilot operated for fast response. Non-locking manual override is standard.
Lightweight aluminum spool. Aluminum spool is precision finished for faster response and optimum dependability.
Low friction spool bore. Bore is roller burnished for lower spool friction and longer seal life.
No-leak seals. Specially treated Buna-N seals assure low friction and long wear without leakage.
Easier maintenance. Simplified design offers quick access for maintenance through 3-bolt valve portion mounting and easy end cover removal.
U.L. listed.

MORE IMAGES


	· Solenoid Valves (2 Position, 1/4" & 3/8" NPTF) Details

	· Rexroth TaskMaster® Solenoid Valves (2 Position, 1/4" & 3/8" NPTF)-2

	· Solenoid Valves (2 Position, 1/4" & 3/8" NPTF) Solenoid Valves (3 Position 1/4" & 3/8" NPTF) & Explosion-Proof Valves Details

Rexroth TaskMaster® Repair Kits, Subplates and Miscellaneous Parts



	Rexroth TaskMaster® Repair Kits & Parts



	Rexroth TaskMaster® Solenoid Operators & Kits

more available ..

Item # R431008491, Rexroth TaskMaster® Solenoid Valves (2 Position, 1/4" & 3/8" NPTF)