Distributor to Industry, Inc.
1017 East Murdock Street
Wichita, Kansas 67214
Toll Free: 800.835.2838
Phone: 316.263.9511
Email: sales@trydti.com • Website: www.trydti.com
All Categories > Industrial Air Valves > Aventics Industrial Air Valves > Aventics Series 740 Valves > Rexroth Series 740 Solenoid Valves For Higher Flow Applications > Item # R432015405  


Item # R432015405, Rexroth Series 740 Solenoid Valves For Higher Flow Applications

4 Way / 2 & 3 Position Solenoid & Air Pilot Operated Diaphragm-Poppet Valve

TECHNICAL DATA:
Port Sizes:
    Integrated Fittings for 3/8", 5/16", and 8mm tubing
    Push-in fitting styles bodies available for metric tubing only (2 position only)
Working Pressure:
    20 PSI minimum
    150 PSI maximum
    External Pilots not available
Flow:
    Cv=0.7 - with Integrated Fittings
    (Cv=1.3 - comparable flow to threaded part valve)
Temperature Range:
    Solenoid Valve +5°F to 122°F
    Air Pilot +5°F to 140°F
Media: Air (either lubricated or non-lubricated)
Materials: Polyacetal Engineering plastic with Buna N seals and diaphragms
Combination Manual Override: Locking & Non-Locking

Electrical connectors must be ordered separately. One per solenoid required. See complete listing on Solenoid Connectors page.

Recommended Tubing:
  • Standard 3/8" O.D> x 0.062" wall - poly tubing
    5/16" O.D. x 0.040 wall - nylon tubing
    8mm x 1.00mm wall poly tubing
Requires optional tube nut kit (R432015289)
Valves designed for 10mm O.D. x 1mm wall poly tubing are also available.
Adapters available: 1/4" O.D. x 0.040 wall - poly tubing.
Tube nuts are supplied with each valve for 3/8" x 0.062 wall poly tubing.

Series 740 Valve with 10mm Supply and Delivery Ports for higher flow applications-2 Position

Note: Use with 10mm O.D. x 1mm wall poly tubing

10mm Valves are supplied without coil(s) or connector(s) which must be ordered separately.





Specifications  · Electrical Data  · Features

Specifications

Old Part #
P -068700-K0000

Description
Single Solenoid

No. of Positions
2

Voltage Tolerance
± 10%

Min. Working Pressure
20 psi

Maximum Working Pressure
150 psi

Temperature Range
+5 to 122 ºF

Media
Air (either lubricated or non-lubricated)

Material
Polyacetal Engineering plastic with Buna N seals and diaphragms

Combination Manual Override
Locking & Non-Locking

Note
Base valves are supplied without coil(s) or connector(s) which must be ordered separately.


Electrical Data
Standard Voltage (all coils are rated for continuous duty) Power Consumption
Inrush Holding
24 VAC-50/60 Hz,
110V-50 Hz/120V-60 Hz
220V-50 Hz/240V		 6.4 VA 3.7 VA
6, 12, 24 VDC 2.7 W




Features
  • NEMA 4 Electrical protection
  • UL recognized & CSA approved coils version available
  • Packaged as a cylinder/valve combination with TaskMaster® cylinders sizes 1 1/2" thru 4".
  • Integrated fittings
  • Adjustable built-in flow controls in R and S exhausts on two position valves
  • Cycle life: 20 to 150 million cycles
  • Response time for 24VDC single solenoid valve:
    (at supply pressure 85 psi)
    On (0-77 psi) 18ms or less
    Off (85-8 psi) 32 ms or less



Print Back