4 Way / 2 & 3 Position 1/4" - 1-1/4" NPTF Solenoid, Air Pilot & Mechanical OperatorsTECHNICAL DATA:Port Sizes: 1/4", 3/8", 1/2", 3/4", 1", 1-1/4" NPTF
Working Pressure:Maximum valve inlet air pressure: 150 psi (10.3 bar)
Minimum air pilot pressure: 15 psi (1.0 bar) w/o return spring (all sizes)
30 psi (2.1 bar) 1" and 1-1/4" valves w/return spring
40 psi (2.8 bar) 1/2" and 3/4" valves w/return spring
50 psi (3.4 bar) 1/4" and 3/8" valves w/return spring
Valves can also be used for vacuum ormore
4 Way / 2 & 3 Position 1/4" - 1-1/4" NPTF Solenoid, Air Pilot & Mechanical OperatorsTECHNICAL DATA:Port Sizes: 1/4", 3/8", 1/2", 3/4", 1", 1-1/4" NPTF
Working Pressure:Maximum valve inlet air pressure: 150 psi (10.3 bar)
Minimum air pilot pressure: 15 psi (1.0 bar) w/o return spring (all sizes)
30 psi (2.1 bar) 1" and 1-1/4" valves w/return spring
40 psi (2.8 bar) 1/2" and 3/4" valves w/return spring
50 psi (3.4 bar) 1/4" and 3/8" valves w/return spring
Valves can also be used for vacuum or dual pressure service when externally piloted.
Flow:Cv 2.39 (2390 Nl/min) 1/4" NPTF
Cv 3.73 (3730 Nl/min) 3/8" NPTF
Cv 6.17 (6170 Nl/min) 1/2" NPTF
Cv 7.88 (7880 Nl/min) 3/4" NPTF
Cv 13.61 (13,610 Nl/min) 1" NPTF
Cv 15.75 (15,750 Nl/min) 1-1/4" NPTF
Temperature Range: -20ºF to +160ºF (-29ºC to 71ºC)
Media: Air and inert gases (In service higher than 18 cycles per minute or with continuous air flow, a lubricator is recommended.)
Materials:Bodies and operators: Die cast aluminum
Spool: Machined from high-tensile aluminum, hard anodized, ground & polished to 8 micro-inch finish
Seals: Buna-N, oil-resistant, and bonded to a metallic ring (Hl-Nitrile Buna-N seals are also available.
Manual Override: Non-Locking
Note: Other coil voltages are available - selection will be done at checkout.
less 
