(8)4 Way / 2 & 3 Position 1/4" - 1-1/4" NPTF Solenoid, Air Pilot & Mechanical Operators
TECHNICAL DATA: Port Sizes: 1/4", 3/8", 1/2", 3/4", 1", 1-1/4" NPTF Working Pressure:
Maximum valve inlet air pressure: 150 psi (10.3 bar) Minimum air pilot pressure: 15 psi (1.0 bar) w/o return spring (all sizes) 30 psi (2.1 bar) 1" and 1-1/4" valves w/return spring 40 psi (2.8 bar) 1/2" and 3/4" valves w/return spring 50 psi (3.4 bar) 1/4" and 3/8" valves w/return spring Valves can also be used for vacuum or dual pressure service when externally piloted.
Temperature Range: -20ºF to +160ºF (-29ºC to 71ºC) Media: Air and inert gases (In service higher than 18 cycles per minute or with continuous air flow, a lubricator is recommended.) Materials:
Bodies and operators: Die cast aluminum Spool: Machined from high-tensile aluminum, hard anodized, ground & polished to 8 micro-inch finish Seals: Buna-N, oil-resistant, and bonded to a metallic ring (Hl-Nitrile Buna-N seals are also available.
Manual Override: Non-Locking
Note: Other coil voltages are available - selection will be done at checkout./Asset/a1466.jpg
(16)4 Way / 2 & 3 Position 1/4" - 1-1/4" NPTF Solenoid, Air Pilot & Mechanical Operators
TECHNICAL DATA: Port Sizes: 1/4", 3/8", 1/2", 3/4", 1", 1-1/4" NPTF Working Pressure:
Maximum valve inlet air pressure: 150 psi (10.3 bar) Minimum air pilot pressure: 15 psi (1.0 bar) w/o return spring (all sizes) 30 psi (2.1 bar) 1" and 1-1/4" valves w/return spring 40 psi (2.8 bar) 1/2" and 3/4" valves w/return spring 50 psi (3.4 bar) 1/4" and 3/8" valves w/return spring Valves can also be used for vacuum or dual pressure service when externally piloted.
Temperature Range: -20ºF to +160ºF (-29ºC to 71ºC) Media: Air and inert gases (In service higher than 18 cycles per minute or with continuous air flow, a lubricator is recommended.) Materials:
Bodies and operators: Die cast aluminum Spool: Machined from high-tensile aluminum, hard anodized, ground & polished to 8 micro-inch finish Seals: Buna-N, oil-resistant, and bonded to a metallic ring (Hl-Nitrile Buna-N seals are also available.
Manual Override: Non-Locking
Note: Other coil voltages are available - selection will be done at checkout./Asset/a1466.jpg
(2)4 Way / 2 & 3 Position 1/4" - 1-1/4" NPTF Solenoid, Air Pilot & Mechanical Operators
TECHNICAL DATA: Port Sizes: 1/4", 3/8", 1/2", 3/4", 1", 1-1/4" NPTF Working Pressure:
Maximum valve inlet air pressure: 150 psi (10.3 bar) Minimum air pilot pressure: 15 psi (1.0 bar) w/o return spring (all sizes) 30 psi (2.1 bar) 1" and 1-1/4" valves w/return spring 40 psi (2.8 bar) 1/2" and 3/4" valves w/return spring 50 psi (3.4 bar) 1/4" and 3/8" valves w/return spring Valves can also be used for vacuum or dual pressure service when externally piloted.
Temperature Range: -20ºF to +160ºF (-29ºC to 71ºC) Media: Air and inert gases (In service higher than 18 cycles per minute or with continuous air flow, a lubricator is recommended.) Materials:
Bodies and operators: Die cast aluminum Spool: Machined from high-tensile aluminum, hard anodized, ground & polished to 8 micro-inch finish Seals: Buna-N, oil-resistant, and bonded to a metallic ring (Hl-Nitrile Buna-N seals are also available.
Manual Override: Non-Locking
Note: Other coil voltages are available - selection will be done at checkout./Asset/a1466.jpg
(6)4 Way / 2 & 3 Position 1/4" - 1-1/4" NPTF Solenoid, Air Pilot & Mechanical Operators
TECHNICAL DATA: Port Sizes: 1/4", 3/8", 1/2", 3/4", 1", 1-1/4" NPTF Working Pressure:
Maximum valve inlet air pressure: 150 psi (10.3 bar) Minimum air pilot pressure: 15 psi (1.0 bar) w/o return spring (all sizes) 30 psi (2.1 bar) 1" and 1-1/4" valves w/return spring 40 psi (2.8 bar) 1/2" and 3/4" valves w/return spring 50 psi (3.4 bar) 1/4" and 3/8" valves w/return spring Valves can also be used for vacuum or dual pressure service when externally piloted.
Temperature Range: -20ºF to +160ºF (-29ºC to 71ºC) Media: Air and inert gases (In service higher than 18 cycles per minute or with continuous air flow, a lubricator is recommended.) Materials:
Bodies and operators: Die cast aluminum Spool: Machined from high-tensile aluminum, hard anodized, ground & polished to 8 micro-inch finish Seals: Buna-N, oil-resistant, and bonded to a metallic ring (Hl-Nitrile Buna-N seals are also available.
Manual Override: Non-Locking
Note: Other coil voltages are available - selection will be done at checkout./Asset/a1466.jpg
(28)4 Way / 2 & 3 Position 1/4" - 1-1/4" NPTF Solenoid, Air Pilot & Mechanical Operators
TECHNICAL DATA: Port Sizes: 1/4", 3/8", 1/2", 3/4", 1", 1-1/4" NPTF Working Pressure:
Maximum valve inlet air pressure: 150 psi (10.3 bar) Minimum air pilot pressure: 15 psi (1.0 bar) w/o return spring (all sizes) 30 psi (2.1 bar) 1" and 1-1/4" valves w/return spring 40 psi (2.8 bar) 1/2" and 3/4" valves w/return spring 50 psi (3.4 bar) 1/4" and 3/8" valves w/return spring Valves can also be used for vacuum or dual pressure service when externally piloted.
Temperature Range: -20ºF to +160ºF (-29ºC to 71ºC) Media: Air and inert gases (In service higher than 18 cycles per minute or with continuous air flow, a lubricator is recommended.) Materials:
Bodies and operators: Die cast aluminum Spool: Machined from high-tensile aluminum, hard anodized, ground & polished to 8 micro-inch finish Seals: Buna-N, oil-resistant, and bonded to a metallic ring (Hl-Nitrile Buna-N seals are also available.
(8)4 Way / 2 & 3 Position 1/4" - 1-1/4" NPTF Solenoid, Air Pilot & Mechanical Operators
TECHNICAL DATA: Port Sizes: 1/4", 3/8", 1/2", 3/4", 1", 1-1/4" NPTF Working Pressure:
Maximum valve inlet air pressure: 150 psi (10.3 bar) Minimum air pilot pressure: 15 psi (1.0 bar) w/o return spring (all sizes) 30 psi (2.1 bar) 1" and 1-1/4" valves w/return spring 40 psi (2.8 bar) 1/2" and 3/4" valves w/return spring 50 psi (3.4 bar) 1/4" and 3/8" valves w/return spring Valves can also be used for vacuum or dual pressure service when externally piloted.
Temperature Range: -20ºF to +160ºF (-29ºC to 71ºC) Media: Air and inert gases (In service higher than 18 cycles per minute or with continuous air flow, a lubricator is recommended.) Materials:
Bodies and operators: Die cast aluminum Spool: Machined from high-tensile aluminum, hard anodized, ground & polished to 8 micro-inch finish Seals: Buna-N, oil-resistant, and bonded to a metallic ring (Hl-Nitrile Buna-N seals are also available.
Manual Override: Non-Locking
Treadle Operators Treadle operators are furnished without a return spring for two-position heel and toe operation. For three-position operation, centering springs are used. The two-position model may also be used as a three-position, closed center combination./Asset/a1466.jpg
(4)4 Way / 2 & 3 Position 1/4" - 1-1/4" NPTF Solenoid, Air Pilot & Mechanical Operators
TECHNICAL DATA: Port Sizes: 1/4", 3/8", 1/2", 3/4", 1", 1-1/4" NPTF Working Pressure:
Maximum valve inlet air pressure: 150 psi (10.3 bar) Minimum air pilot pressure: 15 psi (1.0 bar) w/o return spring (all sizes) 30 psi (2.1 bar) 1" and 1-1/4" valves w/return spring 40 psi (2.8 bar) 1/2" and 3/4" valves w/return spring 50 psi (3.4 bar) 1/4" and 3/8" valves w/return spring Valves can also be used for vacuum or dual pressure service when externally piloted.
Temperature Range: -20ºF to +160ºF (-29ºC to 71ºC) Media: Air and inert gases (In service higher than 18 cycles per minute or with continuous air flow, a lubricator is recommended.) Materials:
Bodies and operators: Die cast aluminum Spool: Machined from high-tensile aluminum, hard anodized, ground & polished to 8 micro-inch finish Seals: Buna-N, oil-resistant, and bonded to a metallic ring (Hl-Nitrile Buna-N seals are also available.
(24)4 Way / 2 & 3 Position 1/4" - 1-1/4" NPTF Solenoid, Air Pilot & Mechanical Operators
TECHNICAL DATA: Port Sizes: 1/4", 3/8", 1/2", 3/4", 1", 1-1/4" NPTF Working Pressure:
Maximum valve inlet air pressure: 150 psi (10.3 bar) Minimum air pilot pressure: 15 psi (1.0 bar) w/o return spring (all sizes) 30 psi (2.1 bar) 1" and 1-1/4" valves w/return spring 40 psi (2.8 bar) 1/2" and 3/4" valves w/return spring 50 psi (3.4 bar) 1/4" and 3/8" valves w/return spring Valves can also be used for vacuum or dual pressure service when externally piloted.
Temperature Range: -20ºF to +160ºF (-29ºC to 71ºC) Media: Air and inert gases (In service higher than 18 cycles per minute or with continuous air flow, a lubricator is recommended.) Materials:
Bodies and operators: Die cast aluminum Spool: Machined from high-tensile aluminum, hard anodized, ground & polished to 8 micro-inch finish Seals: Buna-N, oil-resistant, and bonded to a metallic ring (Hl-Nitrile Buna-N seals are also available.
