Catalog
Aventics Check Valves
rexroth-check-valves-2
Working Pressure: 250 psi maximum
Operating Temperature: -40°F to +160°F (+200°F intermittent service)
Media: Air
Port Size: 1/8" to 1" NPTF
Application
Check valves are installed in a pipeline to permit flow of air in one direction only.
Less than 1/2 psi pressure is required to open the valve. The valve is spring loaded to close when no pressure differential exists.
Therefore, it may be mounted in any position.
The body and cap are made of anodized die cast aluminum. A stainless steel valve, plated spring and Buna N Seal also contribute to trouble free service. a1599.jpg
Supply Pressure: 150 PSIG (10 bar)
Minimum Pressure: 14.5 PSIG (1 bar)
Temperatures: 15° to 160°F (-9° to 71°C)
Media: Air or inert gas
Materials:
Body: Nickel Plated Brass
Swivel Housing: Anodized Aluminum
Seals: Buna-N
Pilot port thread: 10-32 UNF for sizes 1/8 - 1/2 NPTF a1617.jpg
Rexroth Dryseal NPTF Check Valves
(6) Type: High CapacityWorking Pressure: 250 psi maximum
Operating Temperature: -40°F to +160°F (+200°F intermittent service)
Media: Air
Port Size: 1/8" to 1" NPTF
Application
Check valves are installed in a pipeline to permit flow of air in one direction only.
Less than 1/2 psi pressure is required to open the valve. The valve is spring loaded to close when no pressure differential exists.
Therefore, it may be mounted in any position.
The body and cap are made of anodized die cast aluminum. A stainless steel valve, plated spring and Buna N Seal also contribute to trouble free service. a1599.jpg
Rexroth Right Angle Check Valves (Inch Series)
(4) Type: Pilot Operated, Right Angle - for Inch Threaded InletSupply Pressure: 150 PSIG (10 bar)
Minimum Pressure: 14.5 PSIG (1 bar)
Temperatures: 15° to 160°F (-9° to 71°C)
Media: Air or inert gas
Materials:
Body: Nickel Plated Brass
Swivel Housing: Anodized Aluminum
Seals: Buna-N
Pilot port thread: 10-32 UNF for sizes 1/8 - 1/2 NPTF a1617.jpg
