(14)4 Way / 2 & 3 Position Solenoid & Air Pilot Operated Diaphragm-Poppet Valve
TECHNICAL DATA: Port Sizes:
Integrated Fittings for 3/8", 5/16", and 8mm tubing Push-in fitting styles bodies available for metric tubing only (2 position only)
Working Pressure:
20 PSI minimum 150 PSI maximum External Pilots not available
Flow:
Cv=0.7 - with Integrated Fittings (Cv=1.3 - comparable flow to threaded part valve)
Temperature Range:
Solenoid Valve +5°F to 122°F Air Pilot +5°F to 140°F
Media: Air (either lubricated or non-lubricated) Materials: Polyacetal Engineering plastic with Buna N seals and diaphragms Combination Manual Override: Locking & Non-Locking
Electrical connectors must be ordered separately. One per solenoid required. See complete listing on Solenoid Connectors page.
Recommended Tubing:
Standard 3/8" O.D> x 0.062" wall - poly tubing 5/16" O.D. x 0.040 wall - nylon tubing 8mm x 1.00mm wall poly tubing
Requires optional tube nut kit (R432015289) Valves designed for 10mm O.D. x 1mm wall poly tubing are also available. Adapters available: 1/4" O.D. x 0.040 wall - poly tubing. Tube nuts are supplied with each valve for 3/8" x 0.062 wall poly tubing./Asset/a1546.jpg
(13)4 Way / 2 & 3 Position Solenoid & Air Pilot Operated Diaphragm-Poppet Valve
TECHNICAL DATA: Port Sizes:
Integrated Fittings for 3/8", 5/16", and 8mm tubing Push-in fitting styles bodies available for metric tubing only (2 position only)
Working Pressure:
20 PSI minimum 150 PSI maximum External Pilots not available
Flow:
Cv=0.7 - with Integrated Fittings (Cv=1.3 - comparable flow to threaded part valve)
Temperature Range:
Solenoid Valve +5°F to 122°F Air Pilot +5°F to 140°F
Media: Air (either lubricated or non-lubricated) Materials: Polyacetal Engineering plastic with Buna N seals and diaphragms Combination Manual Override: Locking & Non-Locking
Electrical connectors must be ordered separately. One per solenoid required. See complete listing on Solenoid Connectors page. All valves on this page come with 3/8” tube nuts designed to accommodate 3/8" x 0.062" wall poly tubing.
Recommended Tubing:
Standard 3/8" O.D> x 0.062" wall - poly tubing 5/16" O.D. x 0.040 wall - nylon tubing 8mm x 1.00mm wall poly tubing
Requires optional tube nut kit (R432015289) Valves designed for 10mm O.D. x 1mm wall poly tubing are also available. Adapters available: 1/4" O.D. x 0.040 wall - poly tubing. Tube nuts are supplied with each valve for 3/8" x 0.062 wall poly tubing.
The external non-locking manual override button may be pushed from one side to the other to select which delivery port is pressurized initially.
Warning: Do not energize both solenoids at same time or all ports may be pressurized or exhausted./Asset/a1546.jpg
(12)4 Way / 2 & 3 Position Solenoid & Air Pilot Operated Diaphragm-Poppet Valve
TECHNICAL DATA: Port Sizes:
Integrated Fittings for 3/8", 5/16", and 8mm tubing Push-in fitting styles bodies available for metric tubing only (2 position only)
Working Pressure:
20 PSI minimum 150 PSI maximum External Pilots not available
Flow:
Cv=0.7 - with Integrated Fittings (Cv=1.3 - comparable flow to threaded part valve)
Temperature Range:
Solenoid Valve +5°F to 122°F Air Pilot +5°F to 140°F
Media: Air (either lubricated or non-lubricated) Materials: Polyacetal Engineering plastic with Buna N seals and diaphragms Combination Manual Override: Locking & Non-Locking
Electrical connectors must be ordered separately. One per solenoid required. See complete listing on Solenoid Connectors page. All valves on this page come with 3/8” tube nuts designed to accommodate 3/8" x 0.062" wall poly tubing.
Recommended Tubing:
Standard 3/8" O.D> x 0.062" wall - poly tubing 5/16" O.D. x 0.040 wall - nylon tubing 8mm x 1.00mm wall poly tubing
Requires optional tube nut kit (R432015289) Valves designed for 10mm O.D. x 1mm wall poly tubing are also available. Adapters available: 1/4" O.D. x 0.040 wall - poly tubing. Tube nuts are supplied with each valve for 3/8" x 0.062 wall poly tubing.
These valves do not include solenoid connectors. Order one per solenoid.
Dimensions are the same as our standard models./Asset/a1546.jpg
4 Way / 2 & 3 Position Intrinsically Safe Solenoid Valves for Hazardous Locations Classes I, II and III Div I Groups A, B, C, D, E, F and G
TECHNICAL DATA: Port Sizes:
Integrated Fittings for 3/8", 5/16", and 8mm tubing Push-in fitting styles bodies available for metric tubing only (2 position only)
Working Pressure:
20 PSI minimum 150 PSI maximum External Pilots not available
Flow:
Cv=0.7 - with Integrated Fittings (Cv=1.3 - comparable flow to threaded part valve)
Temperature Range:
Solenoid Valve +5°F to 122°F Air Pilot +5°F to 140°F
Media: Air (either lubricated or non-lubricated) Materials: Polyacetal Engineering plastic with Buna N seals and diaphragms Combination Manual Override: Locking & Non-Locking
Electrical connectors must be ordered separately. One per solenoid required. See complete listing on Solenoid Connectors page.
Recommended Tubing:
Standard 3/8" O.D> x 0.062" wall - poly tubing 5/16" O.D. x 0.040 wall - nylon tubing 8mm x 1.00mm wall poly tubing
Requires optional tube nut kit (R432015289) Valves designed for 10mm O.D. x 1mm wall poly tubing are also available. Adapters available: 1/4" O.D. x 0.040 wall - poly tubing. Tube nuts are supplied with each valve for 3/8" x 0.062 wall poly tubing.
For use in low voltage (24VDC) intrinsically safe applications. No other Voltage is approved. Comes with standard non-lighted DIN solenoid connector. Must be connected to an FM Approved Zener Diode Barrier.
Maximum valve pressure is 115 psi.
FM Approved Barrier Manufacturers: Stahl Incorporated-Woburn, MA (Request Application Memo #35 and ADV-300.ISSV for Intrinsically Safe Valve information and Stahl Barrier part numbers.)/Asset/a1577.jpg
(15)4 Way / 2 & 3 Position Solenoid & Air Pilot Operated Diaphragm-Poppet Valve
TECHNICAL DATA: Port Sizes:
Integrated Fittings for 3/8", 5/16", and 8mm tubing Push-in fitting styles bodies available for metric tubing only (2 position only)
Working Pressure:
20 PSI minimum 150 PSI maximum External Pilots not available
Flow:
Cv=0.7 - with Integrated Fittings (Cv=1.3 - comparable flow to threaded part valve)
Temperature Range:
Solenoid Valve +5°F to 122°F Air Pilot +5°F to 140°F
Media: Air (either lubricated or non-lubricated) Materials: Polyacetal Engineering plastic with Buna N seals and diaphragms Combination Manual Override: Locking & Non-Locking
Electrical connectors must be ordered separately. One per solenoid required. See complete listing on Solenoid Connectors page.
Recommended Tubing:
Standard 3/8" O.D> x 0.062" wall - poly tubing 5/16" O.D. x 0.040 wall - nylon tubing 8mm x 1.00mm wall poly tubing
Requires optional tube nut kit (R432015289) Valves designed for 10mm O.D. x 1mm wall poly tubing are also available. Adapters available: 1/4" O.D. x 0.040 wall - poly tubing. Tube nuts are supplied with each valve for 3/8" x 0.062 wall poly tubing.
Standard Series 740 valve with tube nuts for 5/16" (0.040 wall) nylon tubing or 8mm (1mm wall) poly tubing. Push-in fittings are for 10mm (1mm wall) poly tubing. NOTE: Electrical connectors must be ordered separately. One per solenoid required/Asset/740_VALVE.jpg
(2)4 Way / 2 & 3 Position Solenoid & Air Pilot Operated Diaphragm-Poppet Valve
TECHNICAL DATA: Port Sizes:
Integrated Fittings for 3/8", 5/16", and 8mm tubing Push-in fitting styles bodies available for metric tubing only (2 position only)
Working Pressure:
20 PSI minimum 150 PSI maximum External Pilots not available
Flow:
Cv=0.7 - with Integrated Fittings (Cv=1.3 - comparable flow to threaded part valve)
Temperature Range:
Solenoid Valve +5°F to 122°F Air Pilot +5°F to 140°F
Media: Air (either lubricated or non-lubricated) Materials: Polyacetal Engineering plastic with Buna N seals and diaphragms Combination Manual Override: Locking & Non-Locking
Electrical connectors must be ordered separately. One per solenoid required. See complete listing on Solenoid Connectors page.
Recommended Tubing:
Standard 3/8" O.D> x 0.062" wall - poly tubing 5/16" O.D. x 0.040 wall - nylon tubing 8mm x 1.00mm wall poly tubing
Requires optional tube nut kit (R432015289) Valves designed for 10mm O.D. x 1mm wall poly tubing are also available. Adapters available: 1/4" O.D. x 0.040 wall - poly tubing. Tube nuts are supplied with each valve for 3/8" x 0.062 wall poly tubing.
Series 740 Valve with 10mm Supply and Delivery Ports for higher flow applications-2 Position
Note: Use with 10mm O.D. x 1mm wall poly tubing
10mm Valves are supplied without coil(s) or connector(s) which must be ordered separately./Asset/740_VALVE.jpg
(15)4 Way / 2 and 3 Position Solenoid Operated Corrosion Resistant Series 740 Valves
TECHNICAL DATA: Port Sizes:
Integrated Fittings for 3/8", 5/16", and 8mm tubing Push-in fitting styles bodies available for metric tubing only (2 position only)
Working Pressure:
20 PSI minimum 150 PSI maximum External Pilots not available
Flow:
Cv=0.7 - with Integrated Fittings (Cv=1.3 - comparable flow to threaded part valve)
Temperature Range:
Solenoid Valve +5°F to 122°F Air Pilot +5°F to 140°F
Media: Air (either lubricated or non-lubricated) Materials: Polyacetal Engineering plastic with Buna N seals and diaphragms Combination Manual Override: Locking & Non-Locking
Electrical connectors must be ordered separately. One per solenoid required. See complete listing on Solenoid Connectors page.
Recommended Tubing:
Standard 3/8" O.D> x 0.062" wall - poly tubing 5/16" O.D. x 0.040 wall - nylon tubing 8mm x 1.00mm wall poly tubing
Requires optional tube nut kit (R432015289) Valves designed for 10mm O.D. x 1mm wall poly tubing are also available. Adapters available: 1/4" O.D. x 0.040 wall - poly tubing. Tube nuts are supplied with each valve for 3/8" x 0.062 wall poly tubing.
All fasteners and exposed metallic parts are 300 series stainless steel. These valves are recommended for most daily wash-down applications such as food processing, breweries and dairy plants, or anywhere else that corrosion ca be a problem. Dimensions are the same as standard valves.
Special strain relief solenoid connectors are furnished with these valves./Asset/740_VALVE.jpg
(2)4 Way / 2 and 3 Position Solenoid Operated Corrosion Resistant Series 740 Valves
TECHNICAL DATA: Port Sizes:
Integrated Fittings for 3/8", 5/16", and 8mm tubing Push-in fitting styles bodies available for metric tubing only (2 position only)
Working Pressure:
20 PSI minimum 150 PSI maximum External Pilots not available
Flow:
Cv=0.7 - with Integrated Fittings (Cv=1.3 - comparable flow to threaded part valve)
Temperature Range:
Solenoid Valve +5°F to 122°F Air Pilot +5°F to 140°F
Media: Air (either lubricated or non-lubricated) Materials: Polyacetal Engineering plastic with Buna N seals and diaphragms Combination Manual Override: Locking & Non-Locking
Electrical connectors must be ordered separately. One per solenoid required. See complete listing on Solenoid Connectors page.
Recommended Tubing:
Standard 3/8" O.D> x 0.062" wall - poly tubing 5/16" O.D. x 0.040 wall - nylon tubing 8mm x 1.00mm wall poly tubing
Requires optional tube nut kit (R432015289) Valves designed for 10mm O.D. x 1mm wall poly tubing are also available. Adapters available: 1/4" O.D. x 0.040 wall - poly tubing. Tube nuts are supplied with each valve for 3/8" x 0.062 wall poly tubing.
All fasteners and exposed metallic parts are 300 series stainless steel. These valves are recommended for most daily wash-down applications such as food processing, breweries and dairy plants, or anywhere else that corrosion ca be a problem. Dimensions are the same as standard valves.
Special strain relief solenoid connectors are furnished with these valves./Asset/740_VALVE.jpg
(4)4 Way / 2 and 3 Position Manifold Mounts & Gang Stacking
TECHNICAL DATA: Port Sizes:
Integrated Fittings for 3/8", 5/16", and 8mm tubing Push-in fitting styles bodies available for metric tubing only (2 position only)
Working Pressure:
20 PSI minimum 150 PSI maximum External Pilots not available
Flow:
Cv=0.7 - with Integrated Fittings (Cv=1.3 - comparable flow to threaded part valve)
Temperature Range:
Solenoid Valve +5°F to 122°F Air Pilot +5°F to 140°F
Media: Air (either lubricated or non-lubricated) Materials: Polyacetal Engineering plastic with Buna N seals and diaphragms Combination Manual Override: Locking & Non-Locking
Electrical connectors must be ordered separately. One per solenoid required. See complete listing on Solenoid Connectors page.
Recommended Tubing:
Standard 3/8" O.D> x 0.062" wall - poly tubing 5/16" O.D. x 0.040 wall - nylon tubing 8mm x 1.00mm wall poly tubing
Requires optional tube nut kit (R432015289) Valves designed for 10mm O.D. x 1mm wall poly tubing are also available. Adapters available: 1/4" O.D. x 0.040 wall - poly tubing. Tube nuts are supplied with each valve for 3/8" x 0.062 wall poly tubing.
Stack can be held together and mounted with readily available 1/8" "all thread" material.
MANIFOLD INSTALLATION NOTE:
The first and last segment should always be securely mounted to a plate. If more than five valves are used, every third valve segment should also be securely mounted.
Ordering Example (4 Station Manifold) 1 - Inlet Segment 1 - End Segment 2 - Station Segment
/Asset/a1589.jpg