Catalog

Request Information

Unit of Measure

Items	R432015348 Sandwich Flow Controls	R432002543 Rexroth Ceram™ Manifold Accessories, Size 2	0821302064 Sandwich Pressure Regulator	R432009192 Sandwich Pressure Regulator	R432030015 Sandwich Pressure Regulator
Description	N/A Our flow controls sandwich between the valve and subbase eliminating the need for additional piping and external controls for both working ports. Adjustment is with a knob on each side. A fine thread, along with our two stage needle design assures excellent control. Kit includes speed control (1), gasket (1), and screws (4).	N/A 90º Elbow for use in regulator gauge port. 1/8" NPT male to 1/8" NPT female.	N/A Ideal for applications within a manifold where a particular pressure is required for one or more valves. Our regulator controls inlet pressure through to each cylinder port. A relieving type, the knob will also lock into a given position. Kit includes regulator (1), gasket (1), screws (4), plus gauge for the 10-120 psi model.	N/A Ideal for applications within a manifold where a particular pressure is required for one or more valves. Our regulator controls inlet pressure through to each cylinder port. A relieving type, the knob will also lock into a given position. Kit includes regulator (1), gasket (1), screws (4), plus gauge for the 10-120 psi model.	N/A Ideal for applications within a manifold where a particular pressure is required for one or more valves. Our regulator controls inlet pressure through to each cylinder port. A relieving type, the knob will also lock into a given position. Kit includes regulator (1), gasket (1), screws (4), plus gauge for the 10-120 psi model.
Old Part #	N/A P -068605-00000	N/A R432002543	N/A 0821302064	N/A P -029905-00006	N/A P -029905-00007
No. of Ports	N/A 3 5	N/A	N/A 1	N/A 1	N/A 1
Pressure Range	N/A	N/A	N/A 10-120 psi	N/A 5-60 psi	N/A 3-30 psi
Height	N/A 1.14 in.29 mm	N/A	N/A 2.36 in.60 mm	N/A 2.05 in.52 mm	N/A 2.05 in.52 mm
Length	N/A	N/A	N/A 10.08 in.256 mm	N/A 7.68 in.195 mm	N/A 7.68 in.195 mm
Configuration	N/A	N/A	N/A Comes with gauge, gauge port is G 1/8.	N/A No gauge, 1/8" NPT gauge port, 2 gauge port plugs included	N/A No gauge, 1/8" NPT gauge port, 2 gauge port plugs included
Maximum Overall Length	N/A 6.99 in.177.5 mm	N/A	N/A	N/A	N/A
Ports	N/A
Advantages	N/A Eliminate Downtime-They Don’t Stick Normal air valves can stick or jam and cause start-up problems because of their inability to handle accumulations of dir, dust, oil or water in air lines. Not with the Ceram valve. There’s no gap between the plates for dirt and oil to accumulate. The plates are finished so precise that they act like sliding magnets or jo blocks. Solenoid operators of the same voltage on standard valves are interchangeable between all sizes, reducing spare parts inventory and downtime. They Work Great in Normal Applications Too Just because they are so popular in harsh environments, don’t think they won’t work great in a more normal application. Ceram Valves Save Air and Money The tight shut-off with Ceram valves eliminates costly loss of air that is common in other designs. Compressed air that you pay for. Extended Life Years of proven field service verifies an anticipated life of 150 million cycles even under adverse conditions. Overcomes Design Limitations of Other Valves Lapped spool valves normally have a small gap between spool and sleeve that is prone to oil and dirt accumulation, resulting in sticking and the waste of air. Packed spool valves using elastomer seals are subject to deterioration and excessive wear when contamination and/or incompatible lubricants are present.