Catalog

Request Information

Unit of Measure

Items	5747021032 Dual Sandwich Pressure Regulator	R432009411 Dual Sandwich Pressure Regulator	R432009281 Remote Pilot-Operated Regulator	R432002543 Base Side	R432011952 Maintenance Plate
Description	N/A Both delivery port pressures are adjustable individually. Ideal for applications within a manifold where independent regulation of two supply pressures is required; no external pilot supply is required if minimum pilot pressure is available. Supplying port 2 and 4, free flow reverse check valves allow high flow in both directions. Three pressure ranges are available, with locking adjustment knobs at "Control 12" for port 2 and "Control 14" end for port 4. Kit includes regulator (1), gasket (1), screws (4), plus gauges for 10-120 psi model.	N/A Both delivery port pressures are adjustable individually. Ideal for applications within a manifold where independent regulation of two supply pressures is required; no external pilot supply is required if minimum pilot pressure is available. Supplying port 2 and 4, free flow reverse check valves allow high flow in both directions. Three pressure ranges are available, with locking adjustment knobs at "Control 12" for port 2 and "Control 14" end for port 4. Kit includes regulator (1), gasket (1), screws (4), plus gauges for 10-120 psi model.	N/A Allows full remote control of all pressure settings throughout the selected range. Pilot source can be a smaller regulator manually adjusted or electronically adjusted via a command signal for precise control of force and speed. Example: Controlling RPM of an air motor. Rexroth Electro-Pneumatic (E/P) Devices can be directly connected to this unit (see Rexroth sales catalog SC-600). Kit includes regulator (1), gasket (1), gauge port plugs (2) and screws (4) 1/8" NPT GAUGE PORTS 1/8" NPT PILOT PORT	N/A 90º Elbow for use in regulator gauge port. 1/8" NPT male to 1/8" NPT female.	N/A A maintenance plate, mounted between valve and sub-base, Is used when servicing individual valves in a manifold system, or replacing a cylinder while the system is still operating.
Old Part #	N/A	N/A P -030697-00001	N/A P -030382-00000	N/A R432002543	N/A P -048759-00000
ISO Size	N/A Size 3
Pressure Rating	N/A 10-120	N/A 5-60	N/A 10-120	N/A	N/A
Height	N/A 2.64 in.67 mm	N/A 2.52 in.64 mm	N/A 2.52 in.64 mm	N/A	N/A
Maximum Overall Length	N/A	N/A	N/A 8.50 in.216 mm	N/A	N/A
Configuration	N/A Comes with gauges, gauge ports G 1/8	N/A No gauge, 1/8" NPT gauge port, 2 gauge port plugs included	N/A	N/A	N/A
Ports	N/A	N/A	N/A 1/8" NPT	N/A 1/8" NPT	N/A 1/2" NPT
Type	N/A	N/A	N/A	N/A	N/A Silencer
Length	N/A 16.38 in.416 mm	N/A 18.66 in.474 mm	N/A	N/A	N/A
Advantages	N/A Eliminate Downtime-They Don’t Stick Normal air valves can stick or jam and cause start-up problems because of their inability to handle accumulations of dir, dust, oil or water in air lines. Not with the Ceram valve. There’s no gap between the plates for dirt and oil to accumulate. The plates are finished so precise that they act like sliding magnets or jo blocks. Solenoid operators of the same voltage on standard valves are interchangeable between all sizes, reducing spare parts inventory and downtime. They Work Great in Normal Applications Too Just because they are so popular in harsh environments, don’t think they won’t work great in a more normal application. Ceram Valves Save Air and Money The tight shut-off with Ceram valves eliminates costly loss of air that is common in other designs. Compressed air that you pay for. Extended Life Years of proven field service verifies an anticipated life of 150 million cycles even under adverse conditions. Overcomes Design Limitations of Other Valves Lapped spool valves normally have a small gap between spool and sleeve that is prone to oil and dirt accumulation, resulting in sticking and the waste of air. Packed spool valves using elastomer seals are subject to deterioration and excessive wear when contamination and/or incompatible lubricants are present.