Catalog
Aventics Series 740 Valves
rexroth-series-740-valves
TECHNICAL DATA:
Port Sizes:
Materials: Polyacetal Engineering plastic with Buna N seals and diaphragms
Combination Manual Override: Locking & Non-Locking
Electrical connectors must be ordered separately. One per solenoid required. See complete listing on Solenoid Connectors page.
Recommended Tubing:
Valves designed for 10mm O.D. x 1mm wall poly tubing are also available.
Adapters available: 1/4" O.D. x 0.040 wall - poly tubing.
Tube nuts are supplied with each valve for 3/8" x 0.062 wall poly tubing. /Asset/a1546.jpg
TECHNICAL DATA:
Port Sizes:
Materials: Polyacetal Engineering plastic with Buna N seals and diaphragms
Combination Manual Override: Locking & Non-Locking
Electrical connectors must be ordered separately. One per solenoid required. See complete listing on Solenoid Connectors page. All valves on this page come with 3/8” tube nuts designed to accommodate 3/8" x 0.062" wall poly tubing.
Recommended Tubing:
Valves designed for 10mm O.D. x 1mm wall poly tubing are also available.
Adapters available: 1/4" O.D. x 0.040 wall - poly tubing.
Tube nuts are supplied with each valve for 3/8" x 0.062 wall poly tubing.
The external non-locking manual override button may be pushed from one side to the other to select which delivery port is pressurized initially.
Warning: Do not energize both solenoids at same time or all ports may be pressurized or exhausted. /Asset/a1546.jpg
TECHNICAL DATA:
Port Sizes:
Materials: Polyacetal Engineering plastic with Buna N seals and diaphragms
Combination Manual Override: Locking & Non-Locking
Electrical connectors must be ordered separately. One per solenoid required. See complete listing on Solenoid Connectors page. All valves on this page come with 3/8” tube nuts designed to accommodate 3/8" x 0.062" wall poly tubing.
Recommended Tubing:
Valves designed for 10mm O.D. x 1mm wall poly tubing are also available.
Adapters available: 1/4" O.D. x 0.040 wall - poly tubing.
Tube nuts are supplied with each valve for 3/8" x 0.062 wall poly tubing.
These valves do not include solenoid connectors. Order one per solenoid.
Dimensions are the same as our standard models. /Asset/a1546.jpg
Classes I, II and III Div I
Groups A, B, C, D, E, F and G
TECHNICAL DATA:
Port Sizes:
Materials: Polyacetal Engineering plastic with Buna N seals and diaphragms
Combination Manual Override: Locking & Non-Locking
Electrical connectors must be ordered separately. One per solenoid required. See complete listing on Solenoid Connectors page.
Recommended Tubing:
Valves designed for 10mm O.D. x 1mm wall poly tubing are also available.
Adapters available: 1/4" O.D. x 0.040 wall - poly tubing.
Tube nuts are supplied with each valve for 3/8" x 0.062 wall poly tubing.
For use in low voltage (24VDC) intrinsically safe applications. No other Voltage is approved.
Comes with standard non-lighted DIN solenoid connector.
Must be connected to an FM Approved Zener Diode Barrier.
Maximum valve pressure is 115 psi.
FM Approved Barrier Manufacturers:
Stahl Incorporated-Woburn, MA
(Request Application Memo #35 and ADV-300.ISSV for Intrinsically Safe Valve information and Stahl Barrier part numbers.) /Asset/a1577.jpg
TECHNICAL DATA:
Port Sizes:
Materials: Polyacetal Engineering plastic with Buna N seals and diaphragms
Combination Manual Override: Locking & Non-Locking
Electrical connectors must be ordered separately. One per solenoid required. See complete listing on Solenoid Connectors page.
Recommended Tubing:
Valves designed for 10mm O.D. x 1mm wall poly tubing are also available.
Adapters available: 1/4" O.D. x 0.040 wall - poly tubing.
Tube nuts are supplied with each valve for 3/8" x 0.062 wall poly tubing.
Standard Series 740 valve with tube nuts for 5/16" (0.040 wall) nylon tubing or 8mm (1mm wall) poly tubing. Push-in fittings are for 10mm (1mm wall) poly tubing.
NOTE: Electrical connectors must be ordered separately. One per solenoid required /Asset/740_VALVE.jpg
TECHNICAL DATA:
Port Sizes:
Materials: Polyacetal Engineering plastic with Buna N seals and diaphragms
Combination Manual Override: Locking & Non-Locking
Electrical connectors must be ordered separately. One per solenoid required. See complete listing on Solenoid Connectors page.
Recommended Tubing:
Valves designed for 10mm O.D. x 1mm wall poly tubing are also available.
Adapters available: 1/4" O.D. x 0.040 wall - poly tubing.
Tube nuts are supplied with each valve for 3/8" x 0.062 wall poly tubing.
Series 740 Valve with 10mm Supply and Delivery Ports for higher flow applications-2 Position
Note: Use with 10mm O.D. x 1mm wall poly tubing
10mm Valves are supplied without coil(s) or connector(s) which must be ordered separately. /Asset/740_VALVE.jpg
TECHNICAL DATA:
Port Sizes:
Materials: Polyacetal Engineering plastic with Buna N seals and diaphragms
Combination Manual Override: Locking & Non-Locking
Electrical connectors must be ordered separately. One per solenoid required. See complete listing on Solenoid Connectors page.
Recommended Tubing:
Valves designed for 10mm O.D. x 1mm wall poly tubing are also available.
Adapters available: 1/4" O.D. x 0.040 wall - poly tubing.
Tube nuts are supplied with each valve for 3/8" x 0.062 wall poly tubing.
All fasteners and exposed metallic parts are 300 series stainless steel. These valves are recommended for most daily wash-down applications such as food processing, breweries and dairy plants, or anywhere else that corrosion ca be a problem. Dimensions are the same as standard valves.
Special strain relief solenoid connectors are furnished with these valves. /Asset/740_VALVE.jpg
TECHNICAL DATA:
Port Sizes:
Materials: Polyacetal Engineering plastic with Buna N seals and diaphragms
Combination Manual Override: Locking & Non-Locking
Electrical connectors must be ordered separately. One per solenoid required. See complete listing on Solenoid Connectors page.
Recommended Tubing:
Valves designed for 10mm O.D. x 1mm wall poly tubing are also available.
Adapters available: 1/4" O.D. x 0.040 wall - poly tubing.
Tube nuts are supplied with each valve for 3/8" x 0.062 wall poly tubing.
All fasteners and exposed metallic parts are 300 series stainless steel. These valves are recommended for most daily wash-down applications such as food processing, breweries and dairy plants, or anywhere else that corrosion ca be a problem. Dimensions are the same as standard valves.
Special strain relief solenoid connectors are furnished with these valves. /Asset/740_VALVE.jpg
TECHNICAL DATA:
Port Sizes:
Materials: Polyacetal Engineering plastic with Buna N seals and diaphragms
Combination Manual Override: Locking & Non-Locking
Electrical connectors must be ordered separately. One per solenoid required. See complete listing on Solenoid Connectors page.
Recommended Tubing:
Valves designed for 10mm O.D. x 1mm wall poly tubing are also available.
Adapters available: 1/4" O.D. x 0.040 wall - poly tubing.
Tube nuts are supplied with each valve for 3/8" x 0.062 wall poly tubing.
SHEAR PLUG KNOCKOUT
Ganged assembly-common supply pressure obtainable by knockout shear plugs.
Stack can be held together and mounted with readily available 1/8" "all thread" material.
MANIFOLD INSTALLATION NOTE:
The first and last segment should always be securely mounted to a plate. If more than five valves are used, every third valve segment should also be securely mounted.
Ordering Example
(4 Station Manifold)
1 - Inlet Segment
1 - End Segment
2 - Station Segment /Asset/a1589.jpg
Rexroth Series 740 Single and Double Solenoid Valves, 5/2 (4 Way/2 Position)
(14) 4 Way / 2 & 3 Position Solenoid & Air Pilot Operated Diaphragm-Poppet ValveTECHNICAL DATA:
Port Sizes:
- Integrated Fittings for 3/8", 5/16", and 8mm tubing
Push-in fitting styles bodies available for metric tubing only (2 position only)
- 20 PSI minimum
150 PSI maximum
External Pilots not available
- Cv=0.7 - with Integrated Fittings
(Cv=1.3 - comparable flow to threaded part valve)
- Solenoid Valve +5°F to 122°F
Air Pilot +5°F to 140°F
Materials: Polyacetal Engineering plastic with Buna N seals and diaphragms
Combination Manual Override: Locking & Non-Locking
Electrical connectors must be ordered separately. One per solenoid required. See complete listing on Solenoid Connectors page.
Recommended Tubing:
- Standard 3/8" O.D> x 0.062" wall - poly tubing
5/16" O.D. x 0.040 wall - nylon tubing
8mm x 1.00mm wall poly tubing
Valves designed for 10mm O.D. x 1mm wall poly tubing are also available.
Adapters available: 1/4" O.D. x 0.040 wall - poly tubing.
Tube nuts are supplied with each valve for 3/8" x 0.062 wall poly tubing. /Asset/a1546.jpg
Rexroth Series 740 Double Solenoid Valves, 5/3 (4 Way/3 Position)
(13) 4 Way / 2 & 3 Position Solenoid & Air Pilot Operated Diaphragm-Poppet ValveTECHNICAL DATA:
Port Sizes:
- Integrated Fittings for 3/8", 5/16", and 8mm tubing
Push-in fitting styles bodies available for metric tubing only (2 position only)
- 20 PSI minimum
150 PSI maximum
External Pilots not available
- Cv=0.7 - with Integrated Fittings
(Cv=1.3 - comparable flow to threaded part valve)
- Solenoid Valve +5°F to 122°F
Air Pilot +5°F to 140°F
Materials: Polyacetal Engineering plastic with Buna N seals and diaphragms
Combination Manual Override: Locking & Non-Locking
Electrical connectors must be ordered separately. One per solenoid required. See complete listing on Solenoid Connectors page. All valves on this page come with 3/8” tube nuts designed to accommodate 3/8" x 0.062" wall poly tubing.
Recommended Tubing:
- Standard 3/8" O.D> x 0.062" wall - poly tubing
5/16" O.D. x 0.040 wall - nylon tubing
8mm x 1.00mm wall poly tubing
Valves designed for 10mm O.D. x 1mm wall poly tubing are also available.
Adapters available: 1/4" O.D. x 0.040 wall - poly tubing.
Tube nuts are supplied with each valve for 3/8" x 0.062 wall poly tubing.
The external non-locking manual override button may be pushed from one side to the other to select which delivery port is pressurized initially.
Warning: Do not energize both solenoids at same time or all ports may be pressurized or exhausted. /Asset/a1546.jpg
Rexroth Series 740 UL & CSA Approved Solenoid Valves (4 Way/2 Position)
(12) 4 Way / 2 & 3 Position Solenoid & Air Pilot Operated Diaphragm-Poppet ValveTECHNICAL DATA:
Port Sizes:
- Integrated Fittings for 3/8", 5/16", and 8mm tubing
Push-in fitting styles bodies available for metric tubing only (2 position only)
- 20 PSI minimum
150 PSI maximum
External Pilots not available
- Cv=0.7 - with Integrated Fittings
(Cv=1.3 - comparable flow to threaded part valve)
- Solenoid Valve +5°F to 122°F
Air Pilot +5°F to 140°F
Materials: Polyacetal Engineering plastic with Buna N seals and diaphragms
Combination Manual Override: Locking & Non-Locking
Electrical connectors must be ordered separately. One per solenoid required. See complete listing on Solenoid Connectors page. All valves on this page come with 3/8” tube nuts designed to accommodate 3/8" x 0.062" wall poly tubing.
Recommended Tubing:
- Standard 3/8" O.D> x 0.062" wall - poly tubing
5/16" O.D. x 0.040 wall - nylon tubing
8mm x 1.00mm wall poly tubing
Valves designed for 10mm O.D. x 1mm wall poly tubing are also available.
Adapters available: 1/4" O.D. x 0.040 wall - poly tubing.
Tube nuts are supplied with each valve for 3/8" x 0.062 wall poly tubing.
These valves do not include solenoid connectors. Order one per solenoid.
Dimensions are the same as our standard models. /Asset/a1546.jpg
Rexroth Series 740 Intrinsically Safe Solenoid Valves, 5/2
4 Way / 2 & 3 Position Intrinsically Safe Solenoid Valves for Hazardous LocationsClasses I, II and III Div I
Groups A, B, C, D, E, F and G
TECHNICAL DATA:
Port Sizes:
- Integrated Fittings for 3/8", 5/16", and 8mm tubing
Push-in fitting styles bodies available for metric tubing only (2 position only)
- 20 PSI minimum
150 PSI maximum
External Pilots not available
- Cv=0.7 - with Integrated Fittings
(Cv=1.3 - comparable flow to threaded part valve)
- Solenoid Valve +5°F to 122°F
Air Pilot +5°F to 140°F
Materials: Polyacetal Engineering plastic with Buna N seals and diaphragms
Combination Manual Override: Locking & Non-Locking
Electrical connectors must be ordered separately. One per solenoid required. See complete listing on Solenoid Connectors page.
Recommended Tubing:
- Standard 3/8" O.D> x 0.062" wall - poly tubing
5/16" O.D. x 0.040 wall - nylon tubing
8mm x 1.00mm wall poly tubing
Valves designed for 10mm O.D. x 1mm wall poly tubing are also available.
Adapters available: 1/4" O.D. x 0.040 wall - poly tubing.
Tube nuts are supplied with each valve for 3/8" x 0.062 wall poly tubing.
For use in low voltage (24VDC) intrinsically safe applications. No other Voltage is approved.
Comes with standard non-lighted DIN solenoid connector.
Must be connected to an FM Approved Zener Diode Barrier.
Maximum valve pressure is 115 psi.
FM Approved Barrier Manufacturers:
Stahl Incorporated-Woburn, MA
(Request Application Memo #35 and ADV-300.ISSV for Intrinsically Safe Valve information and Stahl Barrier part numbers.) /Asset/a1577.jpg
Rexroth Series 740 Solenoid Valves with Larger Integrated Fittings
(15) 4 Way / 2 & 3 Position Solenoid & Air Pilot Operated Diaphragm-Poppet ValveTECHNICAL DATA:
Port Sizes:
- Integrated Fittings for 3/8", 5/16", and 8mm tubing
Push-in fitting styles bodies available for metric tubing only (2 position only)
- 20 PSI minimum
150 PSI maximum
External Pilots not available
- Cv=0.7 - with Integrated Fittings
(Cv=1.3 - comparable flow to threaded part valve)
- Solenoid Valve +5°F to 122°F
Air Pilot +5°F to 140°F
Materials: Polyacetal Engineering plastic with Buna N seals and diaphragms
Combination Manual Override: Locking & Non-Locking
Electrical connectors must be ordered separately. One per solenoid required. See complete listing on Solenoid Connectors page.
Recommended Tubing:
- Standard 3/8" O.D> x 0.062" wall - poly tubing
5/16" O.D. x 0.040 wall - nylon tubing
8mm x 1.00mm wall poly tubing
Valves designed for 10mm O.D. x 1mm wall poly tubing are also available.
Adapters available: 1/4" O.D. x 0.040 wall - poly tubing.
Tube nuts are supplied with each valve for 3/8" x 0.062 wall poly tubing.
Standard Series 740 valve with tube nuts for 5/16" (0.040 wall) nylon tubing or 8mm (1mm wall) poly tubing. Push-in fittings are for 10mm (1mm wall) poly tubing.
NOTE: Electrical connectors must be ordered separately. One per solenoid required /Asset/740_VALVE.jpg
Rexroth Series 740 Solenoid Valves For Higher Flow Applications
(2) 4 Way / 2 & 3 Position Solenoid & Air Pilot Operated Diaphragm-Poppet ValveTECHNICAL DATA:
Port Sizes:
- Integrated Fittings for 3/8", 5/16", and 8mm tubing
Push-in fitting styles bodies available for metric tubing only (2 position only)
- 20 PSI minimum
150 PSI maximum
External Pilots not available
- Cv=0.7 - with Integrated Fittings
(Cv=1.3 - comparable flow to threaded part valve)
- Solenoid Valve +5°F to 122°F
Air Pilot +5°F to 140°F
Materials: Polyacetal Engineering plastic with Buna N seals and diaphragms
Combination Manual Override: Locking & Non-Locking
Electrical connectors must be ordered separately. One per solenoid required. See complete listing on Solenoid Connectors page.
Recommended Tubing:
- Standard 3/8" O.D> x 0.062" wall - poly tubing
5/16" O.D. x 0.040 wall - nylon tubing
8mm x 1.00mm wall poly tubing
Valves designed for 10mm O.D. x 1mm wall poly tubing are also available.
Adapters available: 1/4" O.D. x 0.040 wall - poly tubing.
Tube nuts are supplied with each valve for 3/8" x 0.062 wall poly tubing.
Series 740 Valve with 10mm Supply and Delivery Ports for higher flow applications-2 Position
Note: Use with 10mm O.D. x 1mm wall poly tubing
10mm Valves are supplied without coil(s) or connector(s) which must be ordered separately. /Asset/740_VALVE.jpg
Rexroth Series 740 Solenoid Valves, Extra Corrosion Resistant
(15) 4 Way / 2 and 3 Position Solenoid Operated Corrosion Resistant Series 740 ValvesTECHNICAL DATA:
Port Sizes:
- Integrated Fittings for 3/8", 5/16", and 8mm tubing
Push-in fitting styles bodies available for metric tubing only (2 position only)
- 20 PSI minimum
150 PSI maximum
External Pilots not available
- Cv=0.7 - with Integrated Fittings
(Cv=1.3 - comparable flow to threaded part valve)
- Solenoid Valve +5°F to 122°F
Air Pilot +5°F to 140°F
Materials: Polyacetal Engineering plastic with Buna N seals and diaphragms
Combination Manual Override: Locking & Non-Locking
Electrical connectors must be ordered separately. One per solenoid required. See complete listing on Solenoid Connectors page.
Recommended Tubing:
- Standard 3/8" O.D> x 0.062" wall - poly tubing
5/16" O.D. x 0.040 wall - nylon tubing
8mm x 1.00mm wall poly tubing
Valves designed for 10mm O.D. x 1mm wall poly tubing are also available.
Adapters available: 1/4" O.D. x 0.040 wall - poly tubing.
Tube nuts are supplied with each valve for 3/8" x 0.062 wall poly tubing.
All fasteners and exposed metallic parts are 300 series stainless steel. These valves are recommended for most daily wash-down applications such as food processing, breweries and dairy plants, or anywhere else that corrosion ca be a problem. Dimensions are the same as standard valves.
Special strain relief solenoid connectors are furnished with these valves. /Asset/740_VALVE.jpg
Rexroth Series 740 Single & Double Air Pilot Valves
(2) 4 Way / 2 and 3 Position Solenoid Operated Corrosion Resistant Series 740 ValvesTECHNICAL DATA:
Port Sizes:
- Integrated Fittings for 3/8", 5/16", and 8mm tubing
Push-in fitting styles bodies available for metric tubing only (2 position only)
- 20 PSI minimum
150 PSI maximum
External Pilots not available
- Cv=0.7 - with Integrated Fittings
(Cv=1.3 - comparable flow to threaded part valve)
- Solenoid Valve +5°F to 122°F
Air Pilot +5°F to 140°F
Materials: Polyacetal Engineering plastic with Buna N seals and diaphragms
Combination Manual Override: Locking & Non-Locking
Electrical connectors must be ordered separately. One per solenoid required. See complete listing on Solenoid Connectors page.
Recommended Tubing:
- Standard 3/8" O.D> x 0.062" wall - poly tubing
5/16" O.D. x 0.040 wall - nylon tubing
8mm x 1.00mm wall poly tubing
Valves designed for 10mm O.D. x 1mm wall poly tubing are also available.
Adapters available: 1/4" O.D. x 0.040 wall - poly tubing.
Tube nuts are supplied with each valve for 3/8" x 0.062 wall poly tubing.
All fasteners and exposed metallic parts are 300 series stainless steel. These valves are recommended for most daily wash-down applications such as food processing, breweries and dairy plants, or anywhere else that corrosion ca be a problem. Dimensions are the same as standard valves.
Special strain relief solenoid connectors are furnished with these valves. /Asset/740_VALVE.jpg
Rexroth Series 740 Manifolds and Gang Stacking
(4) 4 Way / 2 and 3 Position Manifold Mounts & Gang StackingTECHNICAL DATA:
Port Sizes:
- Integrated Fittings for 3/8", 5/16", and 8mm tubing
Push-in fitting styles bodies available for metric tubing only (2 position only)
- 20 PSI minimum
150 PSI maximum
External Pilots not available
- Cv=0.7 - with Integrated Fittings
(Cv=1.3 - comparable flow to threaded part valve)
- Solenoid Valve +5°F to 122°F
Air Pilot +5°F to 140°F
Materials: Polyacetal Engineering plastic with Buna N seals and diaphragms
Combination Manual Override: Locking & Non-Locking
Electrical connectors must be ordered separately. One per solenoid required. See complete listing on Solenoid Connectors page.
Recommended Tubing:
- Standard 3/8" O.D> x 0.062" wall - poly tubing
5/16" O.D. x 0.040 wall - nylon tubing
8mm x 1.00mm wall poly tubing
Valves designed for 10mm O.D. x 1mm wall poly tubing are also available.
Adapters available: 1/4" O.D. x 0.040 wall - poly tubing.
Tube nuts are supplied with each valve for 3/8" x 0.062 wall poly tubing.
SHEAR PLUG KNOCKOUT
Ganged assembly-common supply pressure obtainable by knockout shear plugs.
Stack can be held together and mounted with readily available 1/8" "all thread" material.
MANIFOLD INSTALLATION NOTE:
The first and last segment should always be securely mounted to a plate. If more than five valves are used, every third valve segment should also be securely mounted.
Ordering Example
(4 Station Manifold)
1 - Inlet Segment
1 - End Segment
2 - Station Segment /Asset/a1589.jpg
