Catalog
Type: High Capacity
Working Pressure: 250 psi maximum
Operating Temperature: -40°F to +160°F (+200°F intermittent service)
Media: Air
Port Size: 1/8" to 1" NPTF
Application
Check valves are installed in a pipeline to permit flow of air in one direction only.
Less than 1/2 psi pressure is required to open the valve. The valve is spring loaded to close when no pressure differential exists.
Therefore, it may be mounted in any position.
The body and cap are made of anodized die cast aluminum. A stainless steel valve, plated spring and Buna N Seal also contribute to trouble free service.
Working Pressure: 250 psi maximum
Operating Temperature: -40°F to +160°F (+200°F intermittent service)
Media: Air
Port Size: 1/8" to 1" NPTF
Application
Check valves are installed in a pipeline to permit flow of air in one direction only.
Less than 1/2 psi pressure is required to open the valve. The valve is spring loaded to close when no pressure differential exists.
Therefore, it may be mounted in any position.
The body and cap are made of anodized die cast aluminum. A stainless steel valve, plated spring and Buna N Seal also contribute to trouble free service.
Unit of Measure
Specifications
Old Part # |
N/A P 055028 P -055028-00000 P 55028 P055028 P55028 |
Type |
N/A High Capacity |
Maximum Working Pressure |
N/A 250 psi |
Operating Temperature |
N/A -40 to +160 ºF |
Intermittent Service |
N/A +200 ºF |
Media |
N/A Air |
Ports |
N/A 1 Inch |
Capacity (Cv) |
N/A 13.80 |
Weight |
N/A 24 oz |
"A" Pipe Taps |
N/A 1"-11 1/2" Dryseal NPTF |
Dimension B |
N/A 2 Inch |
Dimension C |
N/A 1 3/4 Inch |
Dimension D |
N/A 4 1/4 Inch |
Dimension E |
N/A 4 Inch |
Note |
N/A All pipe taps are DRYSEAL NPTF. Choice of 1/8", 1/4", 3/8", 1/2", 3/4" and 1". |
