Rexroth Actuator Positioners are compact, pneumatically operated devices used for accurate positioning of engine governor control arms, butterfly valves, carburetors and other low-force mechanisms.
Rexroth offers three types of positioners: diaphragm with radial motion lever, diaphragm-linear, and cylinder-linear. All three models use the same basic principle of applying a predetermined air pressure (supplied by a Rexroth Type "H" Controlair® Valve or Type M PLUS™ proportional pressure control valve) to act on a diaphragm or piston to compress a positioning spring. The actuator lever then assumes a specific position which corresponds to the applied pressure and to the control valve handle position.
Our Actuator Positioners feature light-weight, strong, die-cast construction with a minimum of connections. Years of performance in heavy construction vehicles, drill rigs, marine applications, and other types of installations have proven them to be rugged and highly dependable.
AB-1 Basic AB Type Two-Direction Positioner is made from the basic AA Type and the addition of a separately controlled stop cylinder.
Unit of Measure
Specifications
Old Part #
N/AP -060266-00003
Designation
N/AAB-1 3/8" rod eye
Pressure Range
N/A10-60 psi
Weight
N/A11.5
Temperature Range
N/A-40 to 165 ºF
Media
N/AAir and inert gasses (Consult factory for other uses)
