Catalog

Request Information
Check-Mate 200 pumps provide fluid flow to 0.75 gpm (2.84 lpm) and operating pressures to 4600 psi (320 bar, 32 MPa).

Features and Benefits
  • Severe Duty rod and cylinder for increased durability; Graco’s Severe Duty is a stainless steel, hard chrome cylinder and rod which prolongs the life of the pump and packings
  • SST models for waterborne compatibility
  • Large internal porting for maximum flow
  • Floating piston seal and priming plate improve balance and performance
Typical Applications
  • Dispensing of silicone, latex or acrylic sealants
  • Feed pumps for 2-component epoxy or urethane materials
  • Dispensing of greases and other lubricants
Typical Fluids Handled
  • Sealants
  • Adhesives
  • Inks
  • Mastics
  • Lubricants
Cart-Mounted, Single-Post Inductor, Elevator Packages for 5 Gallon (20 l) Pails
46:1 President pump with stainless steel lower, 5 gal (20 l) inductor assembly, air regulator, cart, a PTFE seal 5 gal (20 l) stainless steel follower plate (222909).
Note: Not assembled at factory.
Unit of Measure

Specifications

Model

 N/A President

Ratio

 N/A 46:1

Type

 N/A Cart-Mounted Single-Post Inductor

Application

 N/A 5 Gallon (20 l) Pails

Features

 N/A Air Regulator PTFE Seal

Maximum Fluid Outlet Pressure

N/A 4600 psi320 bar32.0 MPa

Maximum Fluid Flow @ 60 cpm

N/A 0.6 gpm2.3 lpm

Maximum Air Inlet Pressure

N/A 108 psi7.5 bar0.75 MPa

Fluid Outlet Size

 N/A 1/2 npt(m)

Air Inlet Size (Bare Pump)

 N/A 1/2 npt(f)

Rod and Cylinder

 N/A Severe Duty (chrome over SST)

Overall Length (Bare Pump)

 N/A 47-1/2 in.121 cm

Weight (Pump Only)

 N/A 48 lb21.8 kg

Packings

Throat

 N/A UHMWPE/PTFE

Piston (CS)

 N/A UHMWPE

Piston (SST)

 N/A PTFE

Instruction Manual

Carbon Steel

 N/A 308080

Stainless Steel

 N/A 308200

Ram Mounted Pumps

 N/A 308026

Cart Mounted Pumps

 N/A 308087

Back To Top