Catalog
Used on 231135 and 231137 Only
Check-Mate 200 pumps provide fluid flow to 0.75 gpm (2.84 lpm) and operating pressures to 4600 psi (320 bar, 32 MPa).
Features and Benefits
Check-Mate 200 pumps provide fluid flow to 0.75 gpm (2.84 lpm) and operating pressures to 4600 psi (320 bar, 32 MPa).
Features and Benefits
- Severe Duty rod and cylinder for increased durability; Graco’s Severe Duty is a stainless steel, hard chrome cylinder and rod which prolongs the life of the pump and packings
- SST models for waterborne compatibility
- Large internal porting for maximum flow
- Floating piston seal and priming plate improve balance and performance
- Dispensing of silicone, latex or acrylic sealants
- Feed pumps for 2-component epoxy or urethane materials
- Dispensing of greases and other lubricants
- Sealants
- Adhesives
- Inks
- Mastics
- Lubricants
Unit of Measure
Specifications
Model |
N/A President |
Ratio |
N/A 46:1 |
Features |
N/A Carbon Steel Lower |
Maximum Fluid Outlet Pressure |
N/A 4600 psi320 bar32.0 MPa |
Maximum Fluid Flow @ 60 cpm |
N/A 0.6 gpm2.3 lpm |
Maximum Air Inlet Pressure |
N/A 108 psi7.5 bar0.75 MPa |
Fluid Outlet Size |
N/A 1/2 npt(m) |
Air Inlet Size (Bare Pump) |
N/A 1/2 npt(f) |
Rod and Cylinder |
N/A Severe Duty (chrome over SST) |
Overall Length (Bare Pump) |
N/A 47-1/2 in.121 cm |
Weight (Pump Only) |
N/A 48 lb21.8 kg |
