Distributor to Industry, Inc.
Distributor to Industry, Inc.
Mailing Address:
1017 East Murdock Street
Wichita, Kansas 67214
Phone: 800.835.2838
Toll-Free: 316.263.9511
E-Mail: sales@trydti.com
Website: www.distributorinc.wpengine.com
Print Back
Type: High Capacity
Working Pressure: 250 psi maximum
Operating Temperature: -40°F to +160°F (+200°F intermittent service)
Media: Air
Port Size: 1/8" to 1" NPTF

Application

Check valves are installed in a pipeline to permit flow of air in one direction only.
Less than 1/2 psi pressure is required to open the valve. The valve is spring loaded to close when no pressure differential exists.
Therefore, it may be mounted in any position.
The body and cap are made of anodized die cast aluminum. A stainless steel valve, plated spring and Buna N Seal also contribute to trouble free service.
Unit of Measure

Specifications

Old Part #

 N/A P 055027 P -055027-00000 P 55027 P055027 P55027

Type

 N/A High Capacity

Maximum Working Pressure

 N/A 250 psi

Operating Temperature

 N/A -40 to +160 ºF

Intermittent Service

 N/A +200 ºF

Media

 N/A Air

Ports

 N/A 3/4 Inch

Capacity (Cv)

 N/A 10.00

Weight

 N/A 26 oz

"A" Pipe Taps

 N/A 3/4"-14 Dryseal NPTF

Dimension B

N/A 2 Inch

Dimension C

N/A 1 3/4 Inch

Dimension D

N/A 4 1/4 Inch

Dimension E

N/A 4 Inch

Note

 N/A All pipe taps are DRYSEAL NPTF. Choice of 1/8", 1/4", 3/8", 1/2", 3/4" and 1".