Old Part # |
N/A R432002452 |
ISO Size |
N/A 3 |
Voltage |
N/A without coil |
Valve Model Number |
N/A GS-030032-00000 |
Flow |
N/A 4.3 Cv4300 nL/min |
Valve Weight |
N/A 4.99 lb2.26 kg |
Single Subbase (Side Ported) |
N/A R432015308 R432015309 |
Port Size |
N/A 1/2"-14 3/4"-14 |
Subbase Weight |
N/A 1.85 lb0.84 kg |
Combination Manual Override |
N/A Locking & Non-Locking Sizes I-IV |
Working Pressure |
N/A 0 to 150 psi0 to 10.3 bar |
Vacuum Applications |
N/A 24" Hg |
Temperature Range |
N/A +5 to +150 ºF-15 to 66 ºC |
Media |
N/A Air, either Lubricated or Non-lubricated |
Service Life |
N/A Over 150 million Cycles with or without Line Lubrication |
Material |
N/A Body - Die Cast Zinc Valve Elements - Ceramic Slide Plates (AI2<.sub>O3) |
Type |
N/A Double Solenoid |
No. of Ports |
N/A 5 |
No. of Positions |
N/A 3 |
ISO Standard |
N/A 5599/1 |
Center |
N/A Exhaust Open Center |
A |
N/A 7.54 in.191.5 mm |
B |
N/A 2.71 in.68.9 mm |
C |
N/A 2.59 in.65.8 mm |
D |
N/A 0.41 in.10.4 mm |
E |
N/A 1.62 in.41.3 mm |
F |
N/A 5.23 in.132.8 mm |
G |
N/A 4.18 in.106.2 mm |
H |
N/A 8.36 in.212.3 mm |
J |
N/A 3.25 in.82.6 mm |
K |
N/A 1.05 in.26.7 mm |
Additional Specifications |
N/A
Flow: Valve Size: I-II-III-IV CV:1.1-2.4-4.3-7500 Nl/min: 1100-2400-4300-7500 Temperature Range: Media: Air, either Lubricated or Non-lubricated Service Life: over 150 million Cycles with or without Line Lubrication Combination Manual Override: |
Advantages |
N/A
Eliminate Downtime-They Don’t Stick Normal air valves can stick or jam and cause start-up problems because of their inability to handle accumulations of dir, dust, oil or water in air lines. Not with the Ceram valve. There’s no gap between the plates for dirt and oil to accumulate. The plates are finished so precise that they act like sliding magnets or jo blocks. Solenoid operators of the same voltage on standard valves are interchangeable between all sizes, reducing spare parts inventory and downtime. They Work Great in Normal Applications Too Just because they are so popular in harsh environments, don’t think they won’t work great in a more normal application. Ceram Valves Save Air and Money The tight shut-off with Ceram valves eliminates costly loss of air that is common in other designs. Compressed air that you pay for. Extended Life Years of proven field service verifies an anticipated life of 150 million cycles even under adverse conditions. Overcomes Design Limitations of Other Valves Lapped spool valves normally have a small gap between spool and sleeve that is prone to oil and dirt accumulation, resulting in sticking and the waste of air. Packed spool valves using elastomer seals are subject to deterioration and excessive wear when contamination and/or incompatible lubricants are present. |
World Standard ISO Mounting |
N/A ISO 5599/1 mounting dimensions mean that wherever you send it, it’s interchangeable with other ISO valves. Four basic valves sizes - ISO 1 through 4 with subbases or manifolds with NPT or ISO G (BSPP) ports. |
Valve Sizes/Specifications |
N/A
*Flow measured with 87 psi (6 bar) supply pressure and 14.5 psi (1 bar) pressure drop across the valve. |
Features |
N/A
|
Notes |
N/A
All valves listed above come from the factory internally piloted. To order an externally piloted valve, change the 7th character in the model number (not counting dashes), from 3 to 1. For example, model GT-010032-02626 would become GT-010012-02626. For externally piloted valves less coils. Consult factory for voltages not listed. |
