By Part Number
Adhesives & Sealants for Aerospace, Automotive & Industrial Applications
Air Valves for MMO (Marine, Mobile & Oil Field)
Industrial Air Valves Couplings & Manifolds
Pneumatic/Hydraulic Fittings & Couplings
Fluid Power Process Instrumentation & Process Control Equipment
Industrial Air Valves
Aventics Industrial Air Valves
Aventics Ceram™ ISO 5599-1 Subbases and Manifolds
Rexroth Ceram™ Subbases & Manifolds, Size 3
Rexroth Ceram™ Manifolds, Size 3
Item # R432015491
Email This Page
Save To Favorites
Item # R432015491, Rexroth Ceram™ Manifolds, Size 3
ISO Size III Bottom Ported Manifolds 1/2" or 3/4" NPT Delivery Ports
Old Part #
Manifold Station Segment
Eliminate Downtime-They Don’t Stick
Normal air valves can stick or jam and cause start-up problems because of their inability to handle accumulations of dir, dust, oil or water in air lines. Not with the Ceram valve. There’s no gap between the plates for dirt and oil to accumulate. The plates are finished so precise that they act like sliding magnets or jo blocks. Solenoid operators of the same voltage on standard valves are interchangeable between all sizes, reducing spare parts inventory and downtime.
They Work Great in Normal Applications Too
Just because they are so popular in harsh environments, don’t think they won’t work great in a more normal application.
Ceram Valves Save Air and Money
The tight shut-off with Ceram valves eliminates costly loss of air that is common in other designs. Compressed air that you pay for.
Years of proven field service verifies an anticipated life of 150 million cycles even under adverse conditions.
Overcomes Design Limitations of Other Valves
Lapped spool valves normally have a small gap between spool and sleeve that is prone to oil and dirt accumulation, resulting in sticking and the waste of air. Packed spool valves using elastomer seals are subject to deterioration and excessive wear when contamination and/or incompatible lubricants are present.
Size 3 Manifold Dimensions
Internal to External Pilot Field Conversion, Sizes 3 and 4
Distributor to Industry, Inc. 1017 East Murdock Street Wichita, Kansas 67214
Ph: 316.263.9511 Toll-free: 800.835.2838
Site created by
ThomasNet Web Solutions
and powered by