Catalog

550 Low Pressure Manual Dispenser
Intended for low-pressure meter mix applications. this manual dispenser is ideal for dispensing beads or RTM casting. The design is simple: two ball valves are threaded into the back of the manifold and are connected to a common lever so that both valves open and close at the same time.

600 High Flow (MEGA) Manual Dispenser
Specifically designed to be used with the 162A Series disposable 3/4" diameter static mixer. Allows the user to handle both high flow and high viscosity materials easily. The A & B components are separately ported through the valve body and do not combine until they meet inside the static mixer.

Features and Benefits
  • Moderately priced
  • Materials remain separate until they enter the mixer
1 - 4 of 4 | Results Per Page | View | Unit of Measure
1 

Item #

Series

Description

N/A 550 Series N/A Aluminum valve with series 160 outlet and wide ratio
N/A 550 Series N/A Aluminum valve with series 160 outlet and high flow.
N/A 550 Series N/A Aluminum valve with series 160 outlet and low flow.
N/A 600 Series N/A 1/2" FNPT material inlet and maximum working pressure of 600 psi (40 bar).
1 - 4 of 4 | Results Per Page | View | Unit of Measure
1 

Back To Top