Call 800.835.2838 or 316.263.9511Email
Distributor to Industry, Inc.
All Categories > Drilling Rig Air Valves for MMO (Marine, Mobile & Oil Field) > Emerson Aventics (WABCO) Drilling Rig Air Valves > Aventics Type 'A' Pilotair® Valves - Pneumatic Directional Control > Aventics "A" Pilotair® Block-Type 3-Way Valves > Rexroth 2-CA-1A Normally Closed Pilotair® Valves with Two Direction Cam Roller > View Items  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Rexroth 2-CA-1A Normally Closed Pilotair® Valves with Two Direction Cam Roller

 
Check up to five results to perform an action.


The Two-Direction Cam Roller Operator Kit assembled to the 2-MA-1A PILOTAIR Valve is designated the 2-CA-1A PILOTAIR Valve with Two-Direction Cam Roller.

MATERIALS - Both the block type and panel-mounted "A" PILOTAIR Valves have die-cast anodized aluminum bodies for corrosion resistance. They use a new one piece unitized cartridge valve element that is made of a engineered plastic and stainless steel. The seals are oil resistant, synthetic rubber.

The panel-mounted "A" PILOTAIR contains hardened sintered steel cams and cam followers. The cam shaft is a steel extrusion. The handle shaft is cadmium plated steel.

PRESSURES - Maximum inlet pressure is 250 psi (17.2 bar).

TEMPERATURE - Maximum operating temperature is -40º F to +200ºF (-40ºC to +93ºC)

MEDIA - Air & inert gases (consult factory for other uses).

CAPACITY - As shown by the graph, these valves have been designed to give maximum flow capacity to speed operations and provide full power.

CARTRIDGE VALVE ELEMENT - is constructed of engineered plastic and stainless steel. This design gives superior corrosion resistance and sealing also simplifies repairs.

The Block-Type "A" PILOTAIR Valve is a poppet-type, on-off, 3 way directional valve enclosed in a solid die-cast aluminum block for ruggedness and ease of installation. The basic valve and all operators can be easily and quickly assembled without special tools. This valve line features a choice of six operators, assembled to the basic valve 2-MA-1A, to provide cam, lever and pilot cylinder operation. The design permits conversion from one type of operation to another and simplifies stocking. The body design lends itself to individual or multiple-mounting operations. The Block-Type "A" PILOTAIR Valve can be installed in any convenient position without interfering with the valve operation. The straight, flat sides are identical to provide either right or left hand horizontal mounting. Mounting holes are also provided for mounting the valve vertically from the top or bottom. All valves, except the Normally Open 2-CA-1B, have dual 1/4" NPT IN and OUT ports for ease of piping. Pipe plugs are furnished with each valve for plugging the unused ports. Unitized cartridge valve elements are used for long life, easy service, corrosion resistance and excellent sealing characteristics.


Compare Items
   
  Results 1 - 2 of 2 1 

Item #

Old Part #

Length

Width

Height

Weight
R431004666 P 058721
P -058721-00000
P 58721
P058721
P58721 		2.50 in. 1.50 in. 3.31 in. 3/4 lb
0.34 kg
R431004668 P -058721-00002
P 058721-2
P 58721-2
P058721-2
P58721-2 		2.50 in. 1.50 in. 3.31 in. 3/4 lb
0.34 kg
  Results 1 - 2 of 2 1 
Site created by ThomasNet Web Solutions and powered by Navigator Platform