Catalog
Aventics PowerMaster® Valve, 4-Way Directional Control
exroth-powermaster-valve-4-way-directional-control
TECHNICAL DATA:
Port Sizes: 1/4", 3/8", 1/2", 3/4", 1", 1-1/4" NPTF
Working Pressure:
Media: Air and inert gases (In service higher than 18 cycles per minute or with continuous air flow, a lubricator is recommended.)
Materials:
Note: Other coil voltages are available - selection will be done at checkout. /Asset/a1466.jpg
TECHNICAL DATA:
Port Sizes: 1/4", 3/8", 1/2", 3/4", 1", 1-1/4" NPTF
Working Pressure:
Media: Air and inert gases (In service higher than 18 cycles per minute or with continuous air flow, a lubricator is recommended.)
Materials:
Note: Other coil voltages are available - selection will be done at checkout. /Asset/a1466.jpg
TECHNICAL DATA:
Port Sizes: 1/4", 3/8", 1/2", 3/4", 1", 1-1/4" NPTF
Working Pressure:
Media: Air and inert gases (In service higher than 18 cycles per minute or with continuous air flow, a lubricator is recommended.)
Materials:
Note: Other coil voltages are available - selection will be done at checkout. /Asset/a1466.jpg
TECHNICAL DATA:
Port Sizes: 1/4", 3/8", 1/2", 3/4", 1", 1-1/4" NPTF
Working Pressure:
Media: Air and inert gases (In service higher than 18 cycles per minute or with continuous air flow, a lubricator is recommended.)
Materials:
Note: Other coil voltages are available - selection will be done at checkout. /Asset/a1466.jpg
TECHNICAL DATA:
Port Sizes: 1/4", 3/8", 1/2", 3/4", 1", 1-1/4" NPTF
Working Pressure:
Media: Air and inert gases (In service higher than 18 cycles per minute or with continuous air flow, a lubricator is recommended.)
Materials:
TECHNICAL DATA:
Port Sizes: 1/4", 3/8", 1/2", 3/4", 1", 1-1/4" NPTF
Working Pressure:
Media: Air and inert gases (In service higher than 18 cycles per minute or with continuous air flow, a lubricator is recommended.)
Materials:
Treadle Operators
Treadle operators are furnished without a return spring for two-position heel and toe operation. For three-position operation, centering springs are used. The two-position model may also be used as a three-position, closed center combination. /Asset/a1466.jpg
TECHNICAL DATA:
Port Sizes: 1/4", 3/8", 1/2", 3/4", 1", 1-1/4" NPTF
Working Pressure:
Media: Air and inert gases (In service higher than 18 cycles per minute or with continuous air flow, a lubricator is recommended.)
Materials:
TECHNICAL DATA:
Port Sizes: 1/4", 3/8", 1/2", 3/4", 1", 1-1/4" NPTF
Working Pressure:
Media: Air and inert gases (In service higher than 18 cycles per minute or with continuous air flow, a lubricator is recommended.)
Materials:
Rexroth PowerMaster® Single Solenoid Tapped Exhaust Valves (4 Way, 2 Position - 1/4" - 3/4" NPTF)
(8) 4 Way / 2 & 3 Position 1/4" - 1-1/4" NPTF Solenoid, Air Pilot & Mechanical OperatorsTECHNICAL DATA:
Port Sizes: 1/4", 3/8", 1/2", 3/4", 1", 1-1/4" NPTF
Working Pressure:
- Maximum valve inlet air pressure: 150 psi (10.3 bar)
Minimum air pilot pressure: 15 psi (1.0 bar) w/o return spring (all sizes)
30 psi (2.1 bar) 1" and 1-1/4" valves w/return spring
40 psi (2.8 bar) 1/2" and 3/4" valves w/return spring
50 psi (3.4 bar) 1/4" and 3/8" valves w/return spring
Valves can also be used for vacuum or dual pressure service when externally piloted.
- Cv 2.39 (2390 Nl/min) 1/4" NPTF
Cv 3.73 (3730 Nl/min) 3/8" NPTF
Cv 6.17 (6170 Nl/min) 1/2" NPTF
Cv 7.88 (7880 Nl/min) 3/4" NPTF
Cv 13.61 (13,610 Nl/min) 1" NPTF
Cv 15.75 (15,750 Nl/min) 1-1/4" NPTF
Media: Air and inert gases (In service higher than 18 cycles per minute or with continuous air flow, a lubricator is recommended.)
Materials:
- Bodies and operators: Die cast aluminum
Spool: Machined from high-tensile aluminum, hard anodized, ground & polished to 8 micro-inch finish
Seals: Buna-N, oil-resistant, and bonded to a metallic ring (Hl-Nitrile Buna-N seals are also available.
Note: Other coil voltages are available - selection will be done at checkout. /Asset/a1466.jpg
Rexroth PowerMaster® Double Solenoid Tapped Exhaust Valves (4 Way, 2 & 3 Position - 1/4" - 3/4" NPTF)
(16) 4 Way / 2 & 3 Position 1/4" - 1-1/4" NPTF Solenoid, Air Pilot & Mechanical OperatorsTECHNICAL DATA:
Port Sizes: 1/4", 3/8", 1/2", 3/4", 1", 1-1/4" NPTF
Working Pressure:
- Maximum valve inlet air pressure: 150 psi (10.3 bar)
Minimum air pilot pressure: 15 psi (1.0 bar) w/o return spring (all sizes)
30 psi (2.1 bar) 1" and 1-1/4" valves w/return spring
40 psi (2.8 bar) 1/2" and 3/4" valves w/return spring
50 psi (3.4 bar) 1/4" and 3/8" valves w/return spring
Valves can also be used for vacuum or dual pressure service when externally piloted.
- Cv 2.39 (2390 Nl/min) 1/4" NPTF
Cv 3.73 (3730 Nl/min) 3/8" NPTF
Cv 6.17 (6170 Nl/min) 1/2" NPTF
Cv 7.88 (7880 Nl/min) 3/4" NPTF
Cv 13.61 (13,610 Nl/min) 1" NPTF
Cv 15.75 (15,750 Nl/min) 1-1/4" NPTF
Media: Air and inert gases (In service higher than 18 cycles per minute or with continuous air flow, a lubricator is recommended.)
Materials:
- Bodies and operators: Die cast aluminum
Spool: Machined from high-tensile aluminum, hard anodized, ground & polished to 8 micro-inch finish
Seals: Buna-N, oil-resistant, and bonded to a metallic ring (Hl-Nitrile Buna-N seals are also available.
Note: Other coil voltages are available - selection will be done at checkout. /Asset/a1466.jpg
Rexroth PowerMaster® Single Solenoid Tapped Exhaust Valves (1" & 1-1/4" NPTF)
(2) 4 Way / 2 & 3 Position 1/4" - 1-1/4" NPTF Solenoid, Air Pilot & Mechanical OperatorsTECHNICAL DATA:
Port Sizes: 1/4", 3/8", 1/2", 3/4", 1", 1-1/4" NPTF
Working Pressure:
- Maximum valve inlet air pressure: 150 psi (10.3 bar)
Minimum air pilot pressure: 15 psi (1.0 bar) w/o return spring (all sizes)
30 psi (2.1 bar) 1" and 1-1/4" valves w/return spring
40 psi (2.8 bar) 1/2" and 3/4" valves w/return spring
50 psi (3.4 bar) 1/4" and 3/8" valves w/return spring
Valves can also be used for vacuum or dual pressure service when externally piloted.
- Cv 2.39 (2390 Nl/min) 1/4" NPTF
Cv 3.73 (3730 Nl/min) 3/8" NPTF
Cv 6.17 (6170 Nl/min) 1/2" NPTF
Cv 7.88 (7880 Nl/min) 3/4" NPTF
Cv 13.61 (13,610 Nl/min) 1" NPTF
Cv 15.75 (15,750 Nl/min) 1-1/4" NPTF
Media: Air and inert gases (In service higher than 18 cycles per minute or with continuous air flow, a lubricator is recommended.)
Materials:
- Bodies and operators: Die cast aluminum
Spool: Machined from high-tensile aluminum, hard anodized, ground & polished to 8 micro-inch finish
Seals: Buna-N, oil-resistant, and bonded to a metallic ring (Hl-Nitrile Buna-N seals are also available.
Note: Other coil voltages are available - selection will be done at checkout. /Asset/a1466.jpg
Rexroth PowerMaster® Double Solenoid Tapped Exhaust Valves (1" & 1-1/4" NPTF)
(6) 4 Way / 2 & 3 Position 1/4" - 1-1/4" NPTF Solenoid, Air Pilot & Mechanical OperatorsTECHNICAL DATA:
Port Sizes: 1/4", 3/8", 1/2", 3/4", 1", 1-1/4" NPTF
Working Pressure:
- Maximum valve inlet air pressure: 150 psi (10.3 bar)
Minimum air pilot pressure: 15 psi (1.0 bar) w/o return spring (all sizes)
30 psi (2.1 bar) 1" and 1-1/4" valves w/return spring
40 psi (2.8 bar) 1/2" and 3/4" valves w/return spring
50 psi (3.4 bar) 1/4" and 3/8" valves w/return spring
Valves can also be used for vacuum or dual pressure service when externally piloted.
- Cv 2.39 (2390 Nl/min) 1/4" NPTF
Cv 3.73 (3730 Nl/min) 3/8" NPTF
Cv 6.17 (6170 Nl/min) 1/2" NPTF
Cv 7.88 (7880 Nl/min) 3/4" NPTF
Cv 13.61 (13,610 Nl/min) 1" NPTF
Cv 15.75 (15,750 Nl/min) 1-1/4" NPTF
Media: Air and inert gases (In service higher than 18 cycles per minute or with continuous air flow, a lubricator is recommended.)
Materials:
- Bodies and operators: Die cast aluminum
Spool: Machined from high-tensile aluminum, hard anodized, ground & polished to 8 micro-inch finish
Seals: Buna-N, oil-resistant, and bonded to a metallic ring (Hl-Nitrile Buna-N seals are also available.
Note: Other coil voltages are available - selection will be done at checkout. /Asset/a1466.jpg
Rexroth PowerMaster® Lever Operated Valves (4 Way, 2 and 3 Position)
(28) 4 Way / 2 & 3 Position 1/4" - 1-1/4" NPTF Solenoid, Air Pilot & Mechanical OperatorsTECHNICAL DATA:
Port Sizes: 1/4", 3/8", 1/2", 3/4", 1", 1-1/4" NPTF
Working Pressure:
- Maximum valve inlet air pressure: 150 psi (10.3 bar)
Minimum air pilot pressure: 15 psi (1.0 bar) w/o return spring (all sizes)
30 psi (2.1 bar) 1" and 1-1/4" valves w/return spring
40 psi (2.8 bar) 1/2" and 3/4" valves w/return spring
50 psi (3.4 bar) 1/4" and 3/8" valves w/return spring
Valves can also be used for vacuum or dual pressure service when externally piloted.
- Cv 2.39 (2390 Nl/min) 1/4" NPTF
Cv 3.73 (3730 Nl/min) 3/8" NPTF
Cv 6.17 (6170 Nl/min) 1/2" NPTF
Cv 7.88 (7880 Nl/min) 3/4" NPTF
Cv 13.61 (13,610 Nl/min) 1" NPTF
Cv 15.75 (15,750 Nl/min) 1-1/4" NPTF
Media: Air and inert gases (In service higher than 18 cycles per minute or with continuous air flow, a lubricator is recommended.)
Materials:
- Bodies and operators: Die cast aluminum
Spool: Machined from high-tensile aluminum, hard anodized, ground & polished to 8 micro-inch finish
Seals: Buna-N, oil-resistant, and bonded to a metallic ring (Hl-Nitrile Buna-N seals are also available.
Rexroth PowerMaster® Treadle Operated Valves (4 Way, 2 and 3 Position)
(8) 4 Way / 2 & 3 Position 1/4" - 1-1/4" NPTF Solenoid, Air Pilot & Mechanical OperatorsTECHNICAL DATA:
Port Sizes: 1/4", 3/8", 1/2", 3/4", 1", 1-1/4" NPTF
Working Pressure:
- Maximum valve inlet air pressure: 150 psi (10.3 bar)
Minimum air pilot pressure: 15 psi (1.0 bar) w/o return spring (all sizes)
30 psi (2.1 bar) 1" and 1-1/4" valves w/return spring
40 psi (2.8 bar) 1/2" and 3/4" valves w/return spring
50 psi (3.4 bar) 1/4" and 3/8" valves w/return spring
Valves can also be used for vacuum or dual pressure service when externally piloted.
- Cv 2.39 (2390 Nl/min) 1/4" NPTF
Cv 3.73 (3730 Nl/min) 3/8" NPTF
Cv 6.17 (6170 Nl/min) 1/2" NPTF
Cv 7.88 (7880 Nl/min) 3/4" NPTF
Cv 13.61 (13,610 Nl/min) 1" NPTF
Cv 15.75 (15,750 Nl/min) 1-1/4" NPTF
Media: Air and inert gases (In service higher than 18 cycles per minute or with continuous air flow, a lubricator is recommended.)
Materials:
- Bodies and operators: Die cast aluminum
Spool: Machined from high-tensile aluminum, hard anodized, ground & polished to 8 micro-inch finish
Seals: Buna-N, oil-resistant, and bonded to a metallic ring (Hl-Nitrile Buna-N seals are also available.
Treadle Operators
Treadle operators are furnished without a return spring for two-position heel and toe operation. For three-position operation, centering springs are used. The two-position model may also be used as a three-position, closed center combination. /Asset/a1466.jpg
Rexroth PowerMaster® Pedal Operated Spring Returned Valves (4 Way, 2 and 3 Position)
(4) 4 Way / 2 & 3 Position 1/4" - 1-1/4" NPTF Solenoid, Air Pilot & Mechanical OperatorsTECHNICAL DATA:
Port Sizes: 1/4", 3/8", 1/2", 3/4", 1", 1-1/4" NPTF
Working Pressure:
- Maximum valve inlet air pressure: 150 psi (10.3 bar)
Minimum air pilot pressure: 15 psi (1.0 bar) w/o return spring (all sizes)
30 psi (2.1 bar) 1" and 1-1/4" valves w/return spring
40 psi (2.8 bar) 1/2" and 3/4" valves w/return spring
50 psi (3.4 bar) 1/4" and 3/8" valves w/return spring
Valves can also be used for vacuum or dual pressure service when externally piloted.
- Cv 2.39 (2390 Nl/min) 1/4" NPTF
Cv 3.73 (3730 Nl/min) 3/8" NPTF
Cv 6.17 (6170 Nl/min) 1/2" NPTF
Cv 7.88 (7880 Nl/min) 3/4" NPTF
Cv 13.61 (13,610 Nl/min) 1" NPTF
Cv 15.75 (15,750 Nl/min) 1-1/4" NPTF
Media: Air and inert gases (In service higher than 18 cycles per minute or with continuous air flow, a lubricator is recommended.)
Materials:
- Bodies and operators: Die cast aluminum
Spool: Machined from high-tensile aluminum, hard anodized, ground & polished to 8 micro-inch finish
Seals: Buna-N, oil-resistant, and bonded to a metallic ring (Hl-Nitrile Buna-N seals are also available.
Rexroth PowerMaster® Air Pilot Operated Valves (4 Way, 2 and 3 Position)
(24) 4 Way / 2 & 3 Position 1/4" - 1-1/4" NPTF Solenoid, Air Pilot & Mechanical OperatorsTECHNICAL DATA:
Port Sizes: 1/4", 3/8", 1/2", 3/4", 1", 1-1/4" NPTF
Working Pressure:
- Maximum valve inlet air pressure: 150 psi (10.3 bar)
Minimum air pilot pressure: 15 psi (1.0 bar) w/o return spring (all sizes)
30 psi (2.1 bar) 1" and 1-1/4" valves w/return spring
40 psi (2.8 bar) 1/2" and 3/4" valves w/return spring
50 psi (3.4 bar) 1/4" and 3/8" valves w/return spring
Valves can also be used for vacuum or dual pressure service when externally piloted.
- Cv 2.39 (2390 Nl/min) 1/4" NPTF
Cv 3.73 (3730 Nl/min) 3/8" NPTF
Cv 6.17 (6170 Nl/min) 1/2" NPTF
Cv 7.88 (7880 Nl/min) 3/4" NPTF
Cv 13.61 (13,610 Nl/min) 1" NPTF
Cv 15.75 (15,750 Nl/min) 1-1/4" NPTF
Media: Air and inert gases (In service higher than 18 cycles per minute or with continuous air flow, a lubricator is recommended.)
Materials:
- Bodies and operators: Die cast aluminum
Spool: Machined from high-tensile aluminum, hard anodized, ground & polished to 8 micro-inch finish
Seals: Buna-N, oil-resistant, and bonded to a metallic ring (Hl-Nitrile Buna-N seals are also available.
