Catalog

Request Information

Unit of Measure

Items	R432015347 Sandwich Flow Controls (Meter Out Ports 5 & 3)	0821302048 Sandwich Pressure Regulator (Port 1)	R432009189 Sandwich Pressure Regulator (Port 1)	R432009190 Sandwich Pressure Regulator (Port 1)	0821302051 Dual Sandwich Pressure Regulator (Port 2 & 4)
Description	N/A Our flow controls sandwich between the valve and subbase eliminating the need for addition piping and external controls for both working ports. Adjustment is with a knob on each side thread, along with our two stage needle design ensures excellent control. Kit includes flow control (1), gasket (1), and screws (4).	N/A Ideal for applications within a manifold where a particular pressure is required for one or more valves. Our regulator controls inlet pressure through to each cylinder port. A relieving type, the knob will also lock into a given position. Kit includes regulator (1), gasket (1), screws (4), plus gauge for the 10-120 psi model. Comes with gauge, gauge port is G 1/8.	N/A Ideal for applications within a manifold where a particular pressure is required for one or more valves. Our regulator controls inlet pressure through to each cylinder port. A relieving type, the knob will also lock into a given position. Kit includes regulator (1), gasket (1), screws (4), plus gauge for the 10-120 psi model. No gauge, 1/8" NPT gauge port, 2 gauge port plugs included.	N/A Ideal for applications within a manifold where a particular pressure is required for one or more valves. Our regulator controls inlet pressure through to each cylinder port. A relieving type, the knob will also lock into a given position. Kit includes regulator (1), gasket (1), screws (4), plus gauge for the 10-120 psi model. No gauge, 1/8" NPT gauge port, 2 gauge port plugs included.	N/A Both delivery port pressures are adjustable individually. Ideal for applications within a manifold where independent regulation of two supply pressures is required; no external pilot supply is required if minimum pilot pressure is available. Supplying port 2 and 4, free flow reverse check valves allow high flow in both directions. Three pressure ranges are available, with locking adjustment knobs at "Control 12" for port 2 and "Control 14" end for port 4. Kit includes regulator (1), gasket (1), screws (4), plus gauges for 10-120 psi model. Comes with gauges, gauge ports G 1/8.
Old Part #	N/A P -068604-00000	N/A 0821302048	N/A P -029904-00006	N/A P -029904-00007	N/A 0821302051
No. of Ports	N/A 3 5	N/A 1	N/A 1	N/A 1	N/A 2 4
Height	N/A 0.98 in.25 mm	N/A 1.77 in.45 mm	N/A 1.54 in.39 mm	N/A 1.54 in.39 mm	N/A 1.77 in.45 mm
Width	N/A
Maximum Overall Length	N/A 4.17 in.106 mm	N/A	N/A	N/A	N/A
Length	N/A	N/A 7.80 in.198 mm	N/A 6.73 in.171 mm	N/A 6.73 in.171 mm	N/A 11.42 in.290 mm
Inlet Size	N/A
ISO Size	N/A
Dimension A1	N/A
Dimension A2	N/A
Dimension B	N/A
Dimension C	N/A
Material	N/A
Pressure Range	N/A	N/A 10-120 psi	N/A 5-60 psi	N/A 3-30 psi	N/A 10-120 psi
Advantages	N/A Eliminate Downtime-They Don’t Stick Normal air valves can stick or jam and cause start-up problems because of their inability to handle accumulations of dir, dust, oil or water in air lines. Not with the Ceram valve. There’s no gap between the plates for dirt and oil to accumulate. The plates are finished so precise that they act like sliding magnets or jo blocks. Solenoid operators of the same voltage on standard valves are interchangeable between all sizes, reducing spare parts inventory and downtime. They Work Great in Normal Applications Too Just because they are so popular in harsh environments, don’t think they won’t work great in a more normal application. Ceram Valves Save Air and Money The tight shut-off with Ceram valves eliminates costly loss of air that is common in other designs. Compressed air that you pay for. Extended Life Years of proven field service verifies an anticipated life of 150 million cycles even under adverse conditions. Overcomes Design Limitations of Other Valves Lapped spool valves normally have a small gap between spool and sleeve that is prone to oil and dirt accumulation, resulting in sticking and the waste of air. Packed spool valves using elastomer seals are subject to deterioration and excessive wear when contamination and/or incompatible lubricants are present.