Catalog
4 Way / 2 and 3 Position Solenoid Operated Corrosion Resistant Series 740 Valves
TECHNICAL DATA:
Port Sizes:
Materials: Polyacetal Engineering plastic with Buna N seals and diaphragms
Combination Manual Override: Locking & Non-Locking
Electrical connectors must be ordered separately. One per solenoid required. See complete listing on Solenoid Connectors page.
Recommended Tubing:
Valves designed for 10mm O.D. x 1mm wall poly tubing are also available.
Adapters available: 1/4" O.D. x 0.040 wall - poly tubing.
Tube nuts are supplied with each valve for 3/8" x 0.062 wall poly tubing.
All fasteners and exposed metallic parts are 300 series stainless steel. These valves are recommended for most daily wash-down applications such as food processing, breweries and dairy plants, or anywhere else that corrosion ca be a problem. Dimensions are the same as standard valves.
Special strain relief solenoid connectors are furnished with these valves.
Manual override standard. This unique, external non-locking manual override button for the double air pilot may be pushed from one side to the other to select which delivery port is pressurized.
Double Air Bleeder Valve: Part No. R432008442 (old P -026125-00000)
OPERATION
Exhausting either air pilot port while the opposite port is still pressurized will shift the valve. Valve features stainless steel fasteners for corrosion resistance.
TECHNICAL DATA:
Port Sizes:
- Integrated Fittings for 3/8", 5/16", and 8mm tubing
Push-in fitting styles bodies available for metric tubing only (2 position only)
- 20 PSI minimum
150 PSI maximum
External Pilots not available
- Cv=0.7 - with Integrated Fittings
(Cv=1.3 - comparable flow to threaded part valve)
- Solenoid Valve +5°F to 122°F
Air Pilot +5°F to 140°F
Materials: Polyacetal Engineering plastic with Buna N seals and diaphragms
Combination Manual Override: Locking & Non-Locking
Electrical connectors must be ordered separately. One per solenoid required. See complete listing on Solenoid Connectors page.
Recommended Tubing:
- Standard 3/8" O.D> x 0.062" wall - poly tubing
5/16" O.D. x 0.040 wall - nylon tubing
8mm x 1.00mm wall poly tubing
Valves designed for 10mm O.D. x 1mm wall poly tubing are also available.
Adapters available: 1/4" O.D. x 0.040 wall - poly tubing.
Tube nuts are supplied with each valve for 3/8" x 0.062 wall poly tubing.
All fasteners and exposed metallic parts are 300 series stainless steel. These valves are recommended for most daily wash-down applications such as food processing, breweries and dairy plants, or anywhere else that corrosion ca be a problem. Dimensions are the same as standard valves.
Special strain relief solenoid connectors are furnished with these valves.
Manual override standard. This unique, external non-locking manual override button for the double air pilot may be pushed from one side to the other to select which delivery port is pressurized.
Double Air Bleeder Valve: Part No. R432008442 (old P -026125-00000)
OPERATION
Exhausting either air pilot port while the opposite port is still pressurized will shift the valve. Valve features stainless steel fasteners for corrosion resistance.
Unit of Measure
Specifications
Old Part # |
N/A P -067700-00000 |
Type |
N/A Double Air Pilot |
Typical Width |
N/A 1.38 in.35.0 mm |
No. of Positions |
N/A 2 |
Options |
N/A Double Air Bleeder Valve: Part No. R432008442 (old P –026125-00000) ($65.70) |
Voltage Tolerance |
N/A ± 10% |
Min. Working Pressure |
N/A 20 psi |
Maximum Working Pressure |
N/A 150 psi |
Temperature Range |
N/A +5 to 140 ºF |
Media |
N/A Air (either lubricated or non-lubricated) |
Material |
N/A Polyacetal Engineering plastic with Buna N seals and diaphragms |
Combination Manual Override |
N/A Locking & Non-Locking |
Electrical Data
Electrical Data |
N/A
|
|||||||||||
Features
Features |
N/A
|
