Distributor to Industry, Inc.
Distributor to Industry, Inc.
Mailing Address:
1017 East Murdock Street
Wichita, Kansas 67214
Phone: 800.835.2838
Toll-Free: 316.263.9511
E-Mail: sales@trydti.com
Website: www.distributorinc.wpengine.com
Print Back
4 Way / 2 and 3 Position Manifold Mounts & Gang Stacking

TECHNICAL DATA:
Port Sizes:
    Integrated Fittings for 3/8", 5/16", and 8mm tubing
    Push-in fitting styles bodies available for metric tubing only (2 position only)
Working Pressure:
    20 PSI minimum
    150 PSI maximum
    External Pilots not available
Flow:
    Cv=0.7 - with Integrated Fittings
    (Cv=1.3 - comparable flow to threaded part valve)
Temperature Range:
    Solenoid Valve +5°F to 122°F
    Air Pilot +5°F to 140°F
Media: Air (either lubricated or non-lubricated)
Materials: Polyacetal Engineering plastic with Buna N seals and diaphragms
Combination Manual Override: Locking & Non-Locking

Electrical connectors must be ordered separately. One per solenoid required. See complete listing on Solenoid Connectors page.

Recommended Tubing:
  • Standard 3/8" O.D> x 0.062" wall - poly tubing
    5/16" O.D. x 0.040 wall - nylon tubing
    8mm x 1.00mm wall poly tubing
Requires optional tube nut kit (R432015289)
Valves designed for 10mm O.D. x 1mm wall poly tubing are also available.
Adapters available: 1/4" O.D. x 0.040 wall - poly tubing.
Tube nuts are supplied with each valve for 3/8" x 0.062 wall poly tubing.

SHEAR PLUG KNOCKOUT
Ganged assembly-common supply pressure obtainable by knockout shear plugs.

Stack can be held together and mounted with readily available 1/8" "all thread" material.

MANIFOLD INSTALLATION NOTE:

The first and last segment should always be securely mounted to a plate. If more than five valves are used, every third valve segment should also be securely mounted.

Ordering Example
(4 Station Manifold)
1 - Inlet Segment
1 - End Segment
2 - Station Segment
Aventics Series 740 Manifolds and Gang Stacking
Aventics Series 740 Manifolds and Gang Stacking - 2
Unit of Measure
Items Aventics Series 740 Manifolds and Gang Stacking
R432013811
Rexroth Series 740 Manifolds and Gang Stacking 		Aventics Series 740 Manifolds and Gang Stacking
R432013812
Rexroth Series 740 Manifolds and Gang Stacking 		Aventics Series 740 Manifolds and Gang Stacking
R432013813
Rexroth Series 740 Manifolds and Gang Stacking 		Aventics Series 740 Manifolds and Gang Stacking
R432015880
Rexroth Series 740 Manifolds and Gang Stacking
Old Part # N/A P -067701-00000 N/A P -067702-00000 N/A P -067703-00000 N/A P -069881-00000
Description N/A Inlet Segment N/A End Segment N/A Station Segment N/A Single Subbase (Identical to inlet segment except rear cavities are blocked. Used to manifold mount one valve only.
Voltage Tolerance N/A ± 10%
Min. Working Pressure N/A 20 psi
Maximum Working Pressure N/A 150 psi
Temperature Range N/A +5 to 122 ºF
Media N/A Air (either lubricated or non-lubricated)
Material N/A Polyacetal Engineering plastic with Buna N seals and diaphragms
Combination Manual Override N/A Locking & Non-Locking
Note N/A
  • NEMA 4 Electrical protection
  • UL recognized & CSA approved coils version available
  • Packaged as a cylinder/valve combination with TaskMaster® cylinders sizes 1 1/2" thru 4". See catalog SC-200.
  • Integrated fittings
  • Adjustable built-in flo
Electrical Data N/A
Standard Voltage (all coils are rated for continuous duty) Power Consumption
Inrush Holding
24 VAC-50/60 Hz,
110V-50 Hz/120V-60 Hz
220V-50 Hz/240V		 6.4 VA 3.7 VA
6, 12, 24 VDC 2.7 W
Features N/A Yellow lock tab on manifold segments are scored. This allows the end to be broken off (if desired), making it, tamper resistant, thus requiring a screwdriver to remove valve.