Distributor to Industry, Inc.
Distributor to Industry, Inc.
Mailing Address:
1017 East Murdock Street
Wichita, Kansas 67214
Phone: 800.835.2838
Toll-Free: 316.263.9511
E-Mail: sales@trydti.com
Website: www.distributorinc.wpengine.com
Print Back
4 Way / 2 and 3 Position Solenoid Operated Corrosion Resistant Series 740 Valves

TECHNICAL DATA:
Port Sizes:
    Integrated Fittings for 3/8", 5/16", and 8mm tubing
    Push-in fitting styles bodies available for metric tubing only (2 position only)
Working Pressure:
    20 PSI minimum
    150 PSI maximum
    External Pilots not available
Flow:
    Cv=0.7 - with Integrated Fittings
    (Cv=1.3 - comparable flow to threaded part valve)
Temperature Range:
    Solenoid Valve +5°F to 122°F
    Air Pilot +5°F to 140°F
Media: Air (either lubricated or non-lubricated)
Materials: Polyacetal Engineering plastic with Buna N seals and diaphragms
Combination Manual Override: Locking & Non-Locking

Electrical connectors must be ordered separately. One per solenoid required. See complete listing on Solenoid Connectors page.

Recommended Tubing:
  • Standard 3/8" O.D> x 0.062" wall - poly tubing
    5/16" O.D. x 0.040 wall - nylon tubing
    8mm x 1.00mm wall poly tubing
Requires optional tube nut kit (R432015289)
Valves designed for 10mm O.D. x 1mm wall poly tubing are also available.
Adapters available: 1/4" O.D. x 0.040 wall - poly tubing.
Tube nuts are supplied with each valve for 3/8" x 0.062 wall poly tubing.

All fasteners and exposed metallic parts are 300 series stainless steel. These valves are recommended for most daily wash-down applications such as food processing, breweries and dairy plants, or anywhere else that corrosion ca be a problem. Dimensions are the same as standard valves.

Special strain relief solenoid connectors are furnished with these valves.
Unit of Measure

Specifications

Old Part #

 N/A P -069344-00004

Description

 N/A 12 VDC Single Solenoid

Type

 N/A Single Solenoid

Indicator Lights

 N/A Yes

Voltage

 N/A 12 VDC

No. of Positions

 N/A 2

Voltage Tolerance

 N/A ± 10%

Min. Working Pressure

 N/A 20 psi

Maximum Working Pressure

 N/A 150 psi

Temperature Range

 N/A +5 to 122 ºF

Media

 N/A Air (either lubricated or non-lubricated)

Material

 N/A Polyacetal Engineering plastic with Buna N seals and diaphragms

Combination Manual Override

 N/A Locking & Non-Locking

Electrical Data

Electrical Data

 N/A
Standard Voltage (all coils are rated for continuous duty) Power Consumption
Inrush Holding
24 VAC-50/60 Hz,
110V-50 Hz/120V-60 Hz
220V-50 Hz/240V		 6.4 VA 3.7 VA
6, 12, 24 VDC 2.7 W

Features

Features

 N/A
  • NEMA 4 Electrical protection
  • UL recognized & CSA approved coils version available
  • Packaged as a cylinder/valve combination with TaskMaster® cylinders sizes 1 1/2" thru 4".
  • Integrated fittings
  • Adjustable built-in flow controls in R and S exhausts on two position valves
  • Cycle life: 20 to 150 million cycles
  • Response time for 24VDC single solenoid valve:
    (at supply pressure 85 psi)
    On (0-77 psi) 18ms or less
    Off (85-8 psi) 32 ms or less