Catalog
Aventics Powermaster Valves & Parts
Aventics Valves & Parts
Rexroth
4 Way / 2 & 3 Position
1/4" - 1 1/4" NPTF Solenoid, Air Pilot & Mechanical Operators
TECHNICAL DATA: Port sizes: 1/4", 3/8", 1//2", 3/4", 1", 1 1/4" NPTF.
Working Pressure: Maximum valve inlet air pressure: 150 psi (10.3 bar) Minimum air pilot pressure: 15 psi (1.0 bar) w/o return spring (all sizes) 30 psi (2.1 bar) 1" and 1 1/4" valves w/return spring. 40 psi (2.8 bar) 1/2" and 3/4" valves w/return spring. 50 psi (3.4 bar) 1/4" and 3/8" valves w/return spring. Valves can also be used for vacuum or dual pressure service when externally piloted.
Flow: C 2.39 (2390 NI/min) 1/4" NPTF C 3.73 (3730 NI/min) 3/8" NPTF C 6.17 (6170NI/min) 1/2" NPTF C 7.88 (7880 NI/min) 3/4" NPTF C 13.61 (13,610 NI/min) 1" NPTF C 15.75 (15,750 NI/min) 1 1/4"NPTF
Temperature Range: -20 degrees F to +160 degrees F (-29 degrees C to 71 degrees C)
Materials: Die cast aluminum. Machined from high-tensile aluminum, hard anodized, ground and polished to 8 micro-inch finish. Seals: Buna-N, oil-resistant, and bonded to a metallic ring (HI-Nitrile Buna-N seals are also available.
Manual Override: Non-locking
Electrical Data:Standard Voltage (all coils are rated for continues duty)
120, 240 VAC 60 Hz Power Consumption: Inrush 33 VA Holding 22 VA
12, 24 VDC Power Consumption: 12 W
1/4" - 1 1/4" NPTF Solenoid, Air Pilot & Mechanical Operators
TECHNICAL DATA: Port sizes: 1/4", 3/8", 1//2", 3/4", 1", 1 1/4" NPTF.
Working Pressure: Maximum valve inlet air pressure: 150 psi (10.3 bar) Minimum air pilot pressure: 15 psi (1.0 bar) w/o return spring (all sizes) 30 psi (2.1 bar) 1" and 1 1/4" valves w/return spring. 40 psi (2.8 bar) 1/2" and 3/4" valves w/return spring. 50 psi (3.4 bar) 1/4" and 3/8" valves w/return spring. Valves can also be used for vacuum or dual pressure service when externally piloted.
Flow: C 2.39 (2390 NI/min) 1/4" NPTF C 3.73 (3730 NI/min) 3/8" NPTF C 6.17 (6170NI/min) 1/2" NPTF C 7.88 (7880 NI/min) 3/4" NPTF C 13.61 (13,610 NI/min) 1" NPTF C 15.75 (15,750 NI/min) 1 1/4"NPTF
Temperature Range: -20 degrees F to +160 degrees F (-29 degrees C to 71 degrees C)
Materials: Die cast aluminum. Machined from high-tensile aluminum, hard anodized, ground and polished to 8 micro-inch finish. Seals: Buna-N, oil-resistant, and bonded to a metallic ring (HI-Nitrile Buna-N seals are also available.
Manual Override: Non-locking
Electrical Data:Standard Voltage (all coils are rated for continues duty)
120, 240 VAC 60 Hz Power Consumption: Inrush 33 VA Holding 22 VA
12, 24 VDC Power Consumption: 12 W
