Catalog
3 in (7.6cm) Dual-Post Ram Packages for 55 Gallon (200 l) Drums
10:1 Monark pump with air regulator, 55 gal (200 l) dual-post ram with air-regulator, a 55 gal (200 l) aluminum follower plate with EPDM hose wipers (238929), and drum clamps.
Note: Not assembled at factory.
Check-Mate 450 provides flow rates to 1.7 gpm (6.44 lpm) and operating pressures to 5000 psi (345 bar, 34.5 MPa).
Features & Benefits
10:1 Monark pump with air regulator, 55 gal (200 l) dual-post ram with air-regulator, a 55 gal (200 l) aluminum follower plate with EPDM hose wipers (238929), and drum clamps.
Note: Not assembled at factory.
Check-Mate 450 provides flow rates to 1.7 gpm (6.44 lpm) and operating pressures to 5000 psi (345 bar, 34.5 MPa).
Features & Benefits
- Severe Duty rod and cylinder for increased durability; Graco’s Severe Duty is a stainless steel, hard chrome cylinder and rod which prolongs the life of the pump and packings
- Large internal porting for maximum flow
- Floating piston seal and priming plate improve balance and performance
- Maintains balance over a wide viscosity range
- Minimal bead distortion for critical dispensing of expensive materials
- Dispensing of silicone, latex or acrylic sealants
- Feed pumps for 2-component epoxy or urethane materials
- Dispensing of greases and other lubricants
- Sealants
- Adhesives
- Mastics
- Lubricants
Unit of Measure
Specifications
Model |
N/A Monark |
Ratio |
N/A 10:1 |
Type |
N/A 3 in (7.6cm) Dual-Post Ram |
Application |
N/A 55 Gallon (200 l) Drums |
Features |
N/A Air Regulator |
Maximum Fluid Outlet Pressure |
N/A 1800 psi125 bar12.5 MPa |
Maximum Fluid Flow @ 60 cpm |
N/A 1.0 gpm3.8 lpm |
Maximum Air Input Pressure |
N/A 180 psi12.6 bar1.26 MPa |
Fluid Outlet Size |
N/A 3/4 npt(m) |
Air Inlet Size (Bare Pump) |
N/A 3/8 npt(f) |
Overall Length (Bare Pump) |
N/A 46.25 in.119 cm |
Weight (Pump Only) |
N/A 45 lb21.0 kg |
