Distributor to Industry, Inc.
1017 East Murdock Street
Wichita, Kansas 67214 Toll Free: 800.835.2838 Phone: 316.263.9511 Email:sales@trydti.com •
Website: www.trydti.com
4 Way / 2 and 3 Position Manifold Mounts & Gang Stacking
TECHNICAL DATA: Port Sizes:
Integrated Fittings for 3/8", 5/16", and 8mm tubing Push-in fitting styles bodies available for metric tubing only (2 position only)
Working Pressure:
20 PSI minimum 150 PSI maximum External Pilots not available
Flow:
Cv=0.7 - with Integrated Fittings (Cv=1.3 - comparable flow to threaded part valve)
Temperature Range:
Solenoid Valve +5°F to 122°F Air Pilot +5°F to 140°F
Media: Air (either lubricated or non-lubricated) Materials: Polyacetal Engineering plastic with Buna N seals and diaphragms Combination Manual Override: Locking & Non-Locking
Electrical connectors must be ordered separately. One per solenoid required. See complete listing on Solenoid Connectors page.
Recommended Tubing:
Standard 3/8" O.D> x 0.062" wall - poly tubing 5/16" O.D. x 0.040 wall - nylon tubing 8mm x 1.00mm wall poly tubing
Requires optional tube nut kit (R432015289) Valves designed for 10mm O.D. x 1mm wall poly tubing are also available. Adapters available: 1/4" O.D. x 0.040 wall - poly tubing. Tube nuts are supplied with each valve for 3/8" x 0.062 wall poly tubing.
Stack can be held together and mounted with readily available 1/8" "all thread" material.
MANIFOLD INSTALLATION NOTE:
The first and last segment should always be securely mounted to a plate. If more than five valves are used, every third valve segment should also be securely mounted.
Ordering Example (4 Station Manifold) 1 - Inlet Segment 1 - End Segment 2 - Station Segment
