Call 800.835.2838 or 316.263.9511Email
Distributor to Industry, Inc.
All Categories > Industrial Air Valves > Aventics Industrial Air Valves > Aventics Series 740 Valves > Rexroth Series 740 Manifolds and Gang Stacking > View Items  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Rexroth Series 740 Manifolds and Gang Stacking

 
Check up to five results to perform an action.


4 Way / 2 and 3 Position Manifold Mounts & Gang Stacking

TECHNICAL DATA:
Port Sizes:
    Integrated Fittings for 3/8", 5/16", and 8mm tubing
    Push-in fitting styles bodies available for metric tubing only (2 position only)
Working Pressure:
    20 PSI minimum
    150 PSI maximum
    External Pilots not available
Flow:
    Cv=0.7 - with Integrated Fittings
    (Cv=1.3 - comparable flow to threaded part valve)
Temperature Range:
    Solenoid Valve +5°F to 122°F
    Air Pilot +5°F to 140°F
Media: Air (either lubricated or non-lubricated)
Materials: Polyacetal Engineering plastic with Buna N seals and diaphragms
Combination Manual Override: Locking & Non-Locking

Electrical connectors must be ordered separately. One per solenoid required. See complete listing on Solenoid Connectors page.

Recommended Tubing:
  • Standard 3/8" O.D> x 0.062" wall - poly tubing
    5/16" O.D. x 0.040 wall - nylon tubing
    8mm x 1.00mm wall poly tubing
Requires optional tube nut kit (R432015289)
Valves designed for 10mm O.D. x 1mm wall poly tubing are also available.
Adapters available: 1/4" O.D. x 0.040 wall - poly tubing.
Tube nuts are supplied with each valve for 3/8" x 0.062 wall poly tubing.

SHEAR PLUG KNOCKOUT
Ganged assembly-common supply pressure obtainable by knockout shear plugs.

Stack can be held together and mounted with readily available 1/8" "all thread" material.

MANIFOLD INSTALLATION NOTE:

The first and last segment should always be securely mounted to a plate. If more than five valves are used, every third valve segment should also be securely mounted.

Ordering Example
(4 Station Manifold)
1 - Inlet Segment
1 - End Segment
2 - Station Segment



Compare Items
   
  Results 1 - 4 of 4 1 

Item #

Old Part #

Description
R432013811 P -067701-00000 Inlet Segment
R432013812 P -067702-00000 End Segment
R432013813 P -067703-00000 Station Segment
R432015880 P -069881-00000 Single Subbase (Identical to inlet segment except rear cavities are blocked. Used to manifold mount one valve only.
  Results 1 - 4 of 4 1 
Site created by ThomasNet Web Solutions and powered by Navigator Platform